Használati útmutató CyberData Systems SIP-enabled IP V2

CyberData Systems hangszóró SIP-enabled IP V2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CyberData Systems SIP-enabled IP V2 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 11 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/4
Quick Start Guide 930398E
The IP Endpoint Company
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operation Guide,
which is available on the Documentation page at the following website
address:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2/docs.html
Note You can also navigate to the Documentation page by going to
www.CyberData.net
and following the steps that are indicated by
the following figures:
2.0 Select Power Source
PoE Switch PoE Injector
Set PoE power type to Class 0 = 15.4W CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
2
3
1
VoIP V2 Ceiling Speaker
Quick Start Guide

Termékspecifikációk

Márka: CyberData Systems
Kategória: hangszóró
Modell: SIP-enabled IP V2

Szüksége van segítségre?

Ha segítségre van szüksége CyberData Systems SIP-enabled IP V2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek