Használati útmutató CyberPower CSB606M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CyberPower CSB606M (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.8 csillagra

6-Outlet Surge Protector

CSB606M

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSB606M Surge

Protector. The information contained in this explains the document

features and operation of the CSB606M. Please take a few

moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A breaker.

When an overload occurs, it will automatically switch off. To

resume operation, ensure the overload condition is removed and

reset the surge protector by switching the unit ON.

2. Six Standard Outlets

SPECIFICATIONS

• Model Number: CSB606M

• Outlets: 6 Standard Outlets

• Surge Protection:900 Joules

• Electrical Rating: 125V/15A/1875W

• UL Clamping Voltage: UL 1449 3rd/400V (H-N, H-G, N-G)

• Maximum Peak Current: 45,000A

• 3 AC Lines Protected: H-N: 15,000A, H-G: 15,000A,

N-G: 15,000A;(The maximum surge possible on household

wiring is 6,000 volts)

• Response Time:Less than 1 nanosecond

• Attenuation: Up to 32 dB

• Circuit Breaker:Resettable 15 Amp

• EMI/RFI Filtration: 150k Hz to 100M Hz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry

locations and only indoors. plug into another relocatDO NOT-

able power tap. “daisy chain” surge protectors.DO NOT

DO NOTuse with any aquarium equipment. DO NOTuse if

properly grounded outlets are not available. install this DO NOT

device if there is not at least 10 meters (30 feet) or more of wire

between the electrical outlet and electrical service panel. This

device features an internal protection that will disconnect the

surge protective component at the end of its useful life, but will

maintain power to the load – now unprotected.

TROUBLESHOOTING

If the is switched off, the 15 AMP circuit breaker may ON/OFF

have tripped. Examine your connected equipment and remove

the device that is overloading the circuit. Then, turn the ON/OFF

switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation,

troubleshooting, or general product questions.

• Phone:1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

User Manual

1

2

Termékspecifikációk