Használati útmutató CyberPower PDU41101
CyberPower
kapcsoló
PDU41101
Olvassa el alább 📖 a magyar nyelvű használati útmutatót CyberPower PDU41101 (23 oldal) a kapcsoló kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/23

PDU31xxx
PDU41xxx
PDU71xxx
PDU81xxx
Intelligent PDU User Guide
Copyright © 20 Cyber Power Systems, Inc. All rights reserved. 20
K01-E000003-04

6
Web Interface
Intelligent PDU User Guide
4. Device Reset/Reboot
Users can reboot the PDU or reset all the settings to defaults. See System Tab >
Reset/Reboot.
System Tab > Reset/Reboot
Item
Definiti on
Reboot Power Distribution Unit
Restart the PDU without power cycling any outlet.
Reset Power Distribution Unit
Reset the PDU to its factory default setting and restart it.
This action will power cycle any outlet.
Reset Power Distribution Unit
(TCP/IP Settings Reserved)
Reset the PDU to its factory default setting while
reserving the TCP/IP settings, and restart the PDU. This
action will power cycle any outlet.

9
Web Interface
Intelligent PDU User Guide
Item
Definition
Hysteresis
The point where the environmental state changes from abnormal to
normal and users receive a clearing event notication. The function of
Hysteresis is to avoid receiving multiple event notications.
*For high threshold, the point is the threshold minus the
Hysteresis value; for low threshold, the point is the threshold
plus the Hysteresis value .
For example: The high threshold is 32 C, and hysteresis is 2 C. ° °
The temperature rises to 33 C, you will get a warning. Then °
it goes down to 31 C and up to 33 C repeatedly. No clearing ° °
events and warnings will occur while the temperature readings
are within the Hysteresis. You will not get a clearing event unt il
it drops to 30 C. °
Rate of Change
Dene the abnormal change of temperature per 5 minutes.
For example: The current temperature is 23 C, and rate of °
change is 10 C. If it goes up to 33 C or down to 13 C within 5 ° ° °
minutes, you will get a warning.
Unit
Select the unit of temperature.
Humidity
High Threshold
Set the highest humidity value for a high humidity warning.
Low Threshold
Set the lowest humidity value for a low humidity warning.
Hysteresis
Same as under temperature. Hysteresis
Rate of Change
Same as under temperature. Hysteresis
Contact
Enter the name of each input dry contact relay and use the dropdown
menu to dene the normal status of each one.
Termékspecifikációk
Márka: | CyberPower |
Kategória: | kapcsoló |
Modell: | PDU41101 |
Szüksége van segítségre?
Ha segítségre van szüksége CyberPower PDU41101, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók kapcsoló CyberPower
2 Szeptember 2024
8 Augusztus 2024
6 Augusztus 2024
31 Július 2024
27 Július 2024
25 Július 2024
25 Július 2024
24 Július 2024
21 Július 2024
31 Május 2024
Útmutatók kapcsoló
- kapcsoló Planet
- kapcsoló Marmitek
- kapcsoló Siig
- kapcsoló Buffalo
- kapcsoló Blustream
- kapcsoló AMX
- kapcsoló DEHN
- kapcsoló QNAP
- kapcsoló One For All
- kapcsoló Tripp Lite
- kapcsoló Intellinet
- kapcsoló Kaiser
- kapcsoló Sylvania
- kapcsoló GAO
- kapcsoló ConnectPro
Legújabb útmutatók kapcsoló
9 Április 2025
9 Április 2025
5 Április 2025
5 Április 2025
5 Április 2025
5 Április 2025
3 Április 2025
3 Április 2025
2 Április 2025
2 Április 2025