Használati útmutató CyberPower RELAYIO600

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CyberPower RELAYIO600 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 5.0 csillagra

Rela

R

Quic

CyberPower Systems (US

4241 12th Avenue East S

Phone: 877-297-6937

Fax: 952-403-0009

www.CPSww.com

ay Control

Card

RELAYIO6

00

ck Reference Guide

SA), Inc.

uite 400 Shakopee, MN 55379

d

K01-0000427-00

Overview

The CyberPower Relay

solution for UPS status m

relays. In addition, the

R

UPS shutdown

in bat

CyberPower Online UPS

s

Installation G

Notice: The UPS can rem

1.Remove the

two retai

remove the cover.

2.

Install the CyberPowe

3. Re-

install and tighten

Technical Spe

Electrical

External S/D Voltage

Power Dissipation

Physical

Dimensions (HxWxD

Weight

Environmental

Operating Temperatu

Operating Humidity

Control Card (

RELAYIO600

monitoring and local device co

ELAYIO600

provides

1 input co

ttery mode

.

This card is

system

s with an

expansion po

uide

ain on when installing the

REL

ining screws of the expansion

er

RELAYIO600 card

into the ex

the retaining screws.

ecifications

RELAYIO600

e

7.5 -

12

1.35W M

(Default 12V

D)

43 x 67 x 1

55

1.7 x 2.64 x

6

88.6 g / 3.1

ure

0 - 40

32 - 104

0 to 95%

) offers users a

ntrol

via 5 output

ontact to perform

compatible with

ort.

LAYIO600 card

.

port cover then

xpansion port.

V

Max

input)

5

.7 mm

6.13

in

13 oz

%

Internal Circuit-DB9

I/O Pinout Definition-DB9

PIN

Assignment

Function I/O Jumper

PIN 1 UPS FAIL O/P JP1

PIN 2 SUMMARY ALARM O/P JP2

PIN 3 GND (Common for PIN 4)

Power GND N/A

PIN 4 REMOTE SHUTDOWN Power + Vcc

N/A

PIN 5 COMMON (For Relays) O/P N/A

PIN 6 BYPASS / UPS OFF O/P N/A

PIN 7 BATTERY LOW O/P JP3

PIN 8 UPS ON O/P N/A

PIN 9 POWER FAIL O/P JP4

Note1: Relay contact PIN 1/2/7/9 can be configured as Normally Open (NO)

or Normally Closed (NC).

Note2: Please see the Function Description section for details on jumper

position settings.

Internal Circuit-Terminal Block

I/O Pinout Definition-Terminal Block

Terminal

Assignment

Function I/O Jumper

T1 REMOTE SHUTDOWN Power + Vcc

N/A

T2 GND (Common for PIN 4)

Power GND N/A

T3 SUMMARY ALARM O/P JP2

T4 BYPASS / UPS OFF O/P N/A

T5 BATTERY LOW O/P JP3

T6 POWER FAIL O/P JP4

T7 UPS ON O/P N/A

T8 UPS FAIL O/P JP1

T9 COMMON (For Relays) O/P N/A

T10 COMMON (For Relays) O/P N/A

Note1: Relay contact T3/5/6/8 can be configured as Normally Open (NO) or

Normally Closed (NC).

Note2: Please see the Function Description section for details on jumper

position settings.

Termékspecifikációk