Használati útmutató Denver CAU-438 MK2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Denver CAU-438 MK2 (2 oldal) a rádió kategóriában. Ezt az útmutatót 16 ember találta hasznosnak.

CAU-438 ENG

Quick Set-Up Guide

WIRING UP YOUR RADIO

***IMPORTANT*** Please make sure the yellow wire is connected to the permanent live feed

(+12V) of the vehicle battery for the preset memory's Disconnect negative battery terminal

from battery before starting installation. Consult the vehicle owner's manual for proper

instructions.

1.Install the Radio using the Din-Front

Mount or Din-Rear Mount Method.

2.The Radio is equipped with ISO

connector. ISO connector is the universal

connector for the connection of car

radio.

3.Make sure that you have a good chassis

ground. Good ground connections will

eliminate most electrical noise

problems.

4.Please seek professional advice if you are

inexperienced installing this type of

product.

WORKING WITH THE UNIT

1.USB Flashdrive & SD Card

Simply plug your USB Flashdrive or SD Card (or both) into the

USB socket/Card slot. The contents will be played

automatically. These can be removed at any time.

2.Aux-in Jack

The front Aux-in Jack can be used for connecting additional audio

devices (i.e.MP3 players/lpods) to the unit The Aux-in cable (supplied

with the unit) can be used for this connection. Simply connect one end

into the Aux-in Jack and the other to your MP3/lpod.

3. Radio

Press the BND / ID3 button to select RADIO mode. Press the PTY

button to select suitable band. You can press and hold the seek

up/down button to search for your favourite stations, or you can press

and hold the APS button to automatically scan tne strongest stations

and save them as presets.

YELLOW

Connect to

the B+12V

RED

Connect to lgni

tion Key

BLACK

Ground

Permanent

+12V Fused

Auto

Antenna

Ignition

Key

+12V

GND

Fused

Rear Left

Front Left

Front Right

Rear Right

Termékspecifikációk