Használati útmutató DeWalt D24001

Olvassa el alább 📖 a magyar nyelvű használati útmutatót DeWalt D24001 (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.3 csillagra

FIG. 3

DEWALTIndustrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286(AUG04) Form No. 627026-00 D24001 Copyright ©2004 DEWALT

FIG. 2

FIG. 1

Heavy Duty Tile Saw Stand

D24001

This Tile Saw Stand is designed for use with the D24000 Wet Tile

Saw. Do not use this saw stand with any other tool.

WARNING: For your own safety, read the tool instruction manual

before using any accessory. Failure to heed these warnings may

result in personal injury and serious damage to the tool and the

accessory. When servicing this tool, use only identical replacement

parts.

READ INSTRUCTIONS BEFORE USE

WARNING:

•Read tool and stand instruction manuals before use.

•For use with D24000 Wet Tile Saw.

•Open stand fully before use.

•Maximum load: 300lbs. (136kg)

•Do not climb, sit or stand on saw stand.

•Do not use stand on uneven or unstable surface.

•Assemble stand as shown in Figure 1.

TO ADJUST TILE SAW STAND

1.The leg extensions each have a series of holes to allow multiple

stand heights.

2.Adjust the height of the stand then use fasteners to secure leg

extensions. Ensure that each extension is adjusted to the same

height.

TO USE TILE SAW STAND

1.Unfold the saw stand until it is fully opened. Place it upright, as

shown in Figure 2.

2.Place the Wet Tile Saw pan on the stand. The rear feet on the

pan have two semi-circular reliefs; place these over the rear rail

as shown in Figure 3. The front rail should rest behind the front

feet on the pan.

TO CLOSE TILE SAW STAND

1.Remove the Wet Tile Saw from the stand.

2.Pick the stand up by the top rails and fold in to close.

REAR PAN FEET

PIEDS ARRIÈRES

DU PLATEAU

PARTE INFERIOR

TRASERA

Termékspecifikációk