Használati útmutató Digitus 1000Base-T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Digitus 1000Base-T (3 oldal) a audio/videó-konverter kategóriában. Ezt az útmutatót 22 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.2 csillagra

Gigabit Fiber Ethernet Converter

10/100/1000Base-T/TX to 1000Base-SX/LX

User’s Manual

Overview

Gigabit fiber media converter is a 10/100/1000 auto negotiating media converter. The copper port

auto negotiates the connected device’s speed and duplex mode: 10/100/1000Mbps half duplex;

or 10/100/1000 Mbps full duplex; the fiber port always operates at 1000Mbps. The maximum

distance is Multi-mode 0.5 or 2km and single-mode 10/20/40/60km or 80km.

Installation

1. Interface

RJ-45 interface

The transmission media adopts CAT5 twisted-pair with typical length of 100 meter.

It features the function of automatically identifying the through line and cross wire

Fiber interface

Fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the

two sets of optical transceiver are interfaced or connected to switch with fiber interface, the

fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).

2. Connection

The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45

jack of the media converter through twisted-pair. The fiber device is connected to fiber

interface of the media converter. Then switch on. The corresponding LED is on for correct

connection. (See the table below for the LED indicator lamp)

Termékspecifikációk