Használati útmutató Dimplex OSP003

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dimplex OSP003 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/1
Installation Instructions
This spacer is suitable for the following Optimyst Inset Fires;
CRS20, & PNN20.
Introduction
Installation Offer the spacer up to the back of the re. The front of the spacer sits inside the
existing surround.
Using the 6 screws provided and a pozi-head screw driver, screw the spacer in
place ensuring that the top and side edges of the spacer line up with the top and
sides of the re frame - see diagram
Cleaning For general cleaning use a soft clean duster.
Never use abrasive cleaners
Dimplex
Millbrook House,
Grange Drive,
Hedge End,
Southampton,
Hampshire,
SO30 2DF
Tel 0844 879 3588
Website www.dimplex.co.uk
Republic of Ireland
Tel 01 8428222
c
Glen Dimplex Heating & Ventilation.
All rights reserved. Material contained in this publication may not be reproduced in whole or part, without prior permission in writing
of Glen Dimplex Heating &Ventilation.
8/54386/0 Issue 1

Termékspecifikációk

Márka: Dimplex
Kategória: nincs kategorizálva
Modell: OSP003

Szüksége van segítségre?

Ha segítségre van szüksége Dimplex OSP003, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek