Használati útmutató Dimplex RFM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dimplex RFM (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.4 csillagra

Installation Instructions

Radio Frequency Module (RFM)

ISSUE 1

For installation and compatibility, check your product’s manual by following the instruction

below.

Your product’s model code and series letter will be listed on the rating label on your

product. Visit Dimplex.co.uk and enter the model code into the search field.

Open the product page for your product’s model code and look for the manuals and

guides section. The ‘Maintenance’ section of the manual will list how to replace the

existing tray with the radio frequency module. You do not need to replace the battery

when you do this.

The installation process for most units is as follows, but please confirm using our

website before attempting installation

1. Slide the lock tab across.

2. Pull the tray out using the indentation. You may need a small, flat screwdriver for this.

3. Replace the tray with the radio frequency module.

4.Power the product on and make sure that the RF comms are enabled.

Comms settings will be located in the settings menu (please check

your product’s instruction manual for more information).

2

1

3

WARNING: Ensure power to the product is isolated at the mains before installation

To connect your product to a Dimplex Control system, tap

‘add a product’ on the app and follow the instructions.

Contact: Dimplex.co.uk/support

Termékspecifikációk