Használati útmutató Dimplex RX9911

Dimplex nincs kategorizálva RX9911

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dimplex RX9911 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
Contact Details
Pleasenotethat some contact ofthe details on 
thisPDFdocumentmaynotbe current.
Pleaseuse  the following detailsifyouneedto
contactus:
Telephone:0844 879 3588
Email:customer.services@gdcgroup.co.uk
The widecustomer alsosupportsection websiteofour  features a
rangeof ofinformationwhichmaybe use availabletoyouandis 
24 ahours day.Itincludes:
• Operating  and installation instructions
• Easy   ‘How to use’ guides for storage heaters
• Service  and repairs
• Wheretobuyourproducts
• Literature downloads
• Heating  requirement calculator
 ‐Visit www.dimplex.co.uk/support
A division of GDC Group Ltd
Millbrook House Grange Drive Hedge End Southampton SO30 2DF
www.dimplex.co.uk
Re
g
istered No: 1313016 En
g
land
VAT GB 287 1315 50004
EEE Producer Registration Number –
WEE/GE0057TS
Paper from sustainable sources
Installation and
Operating Instructions
Pilot Wire Programming Cassette - Model No. RX9911
General Description
Installation
The RX9911 can only be used in RPX, EVX and EVS heaters.
They offer either individual programming (each individual heater has a programming cassette)
or group programming from a master heater through the pilot wire. Group programming can
drive up to 20 slave heaters.
Two heating positions are offered: comfort and economy setback, with temperatures set using
the controls on the heater.
A choice of heating programmes are available for each day of the week. There are 7 pre-set
programmes, from P1 to P7 or a customised programme P=. The seven pre-set programmes
and customised programme will remain stored even if the mains supply is cut off for more
than seven hours. However, the day and time will have to be set again as the built in battery
will only operate for seven hours maximum when removed from the heater.
The RX9911 is rated at 230V.
1. Using a narrow bladed screwdriver, carefully release the cover from the slot on the
heater
2. Insert the programmer fully so that it clicks into position
3. Turn the control knob on the heater(s) to the PROG position
Individual Programming:
Fit one programmer to each RPX, EVX or EVS
heater. (NB. When the heater is installed, the black
pilot wire in the mains supply cable should be
trimmed back in accordance with the installation
instructions.
Programming for a Zone:
The heater containing the RX9911 is the Master heater and connected by the black pilot wire
to the Slave heaters. The Master heater determines the Programme and heating levels for all
the heaters (Comfort, Setback and Frost Protection), but the actual comfort and setback
temperatures should still be set on each individual heater (see heater instructions). The master
heater will switch between comfort and setback according to the programme. On every slave
heater, turn the position button to PROG.
421AA0791.B00 NR/BLA 44/00
Display
1
2
3
4
5
6
7
03 : 58
+ -/Hgel OK MODE
Comfort Hours
Setback Hours
Override - Frost Protection
4. Choice of programme
for each day
1 segment per hour
1. Time
2. Day
3. Indicator
flashes
Programmer
LEN
Programmer
Master Slave Slave
Pilot Wire Up to 20
units
LEN
- 1/2 -
T9908/010/A
Electrical Connection
Master/Slave Heaters
Operating Instructions
Setting the time:
Choosing the programmes:
Frost Protection/Holiday Setting:
Overriding the master
programme:
Problem Solving
General Cleaning
After Sales Service
Do NOT connect the BLACK (PILOT) SIGNAL WIRE to earth.
When the programmer drives other heaters, connect the pilot wire from the “master” unit to the
pilot wire of a “slave” heater and then from one slave heater to another (in series).
Any 240V insulated cable may be used to link pilot wires around the ring main. The signal current
is low. Suitable connections would be either an additional single core wire marked or colour
coded appropriately or use a 4 core cable throughout the heater ring.
The RX9911 can be programmed either inserted directly into the heater or out of the heater. If
choosing the latter option, the cassette must be first left in the heater for 15 minutes to charge
the battery. Remember that the battery only lasts for seven hours.
00.00 flashes
1. Press the mode button once until hour flashes
2. Alter the hours with
+
++
+ - or --
- sign and confirm OK
3. Alter the minutes with
++++ or ---- sign and confirm OK
4. Alter the days with
+
++
+ or -
--
- sign and confirm OK
The black arrow marks the selected day (e.g. 1 = Monday, 2 = Tuesday etc).
Press mode twice (once for 2 seconds and once again briefly - P1 should flash) then with the
+
or - sign scroll through the preset programme choices P1 to P7 and P=. Select the programme
for day 1 (Monday) by pressing OK. Follow this sequence for each day of the week.
To choose the customised programme select P=, press mode and change the temperature
levels for every hour of the day by pressing +
++
+ for comfort. and ---- for setback.Then, after
completing the 24 hours, confirm the day with OK.
The programmer will revert to the original display screen (time + day + ...) only after day 7 has
received a programme.
The frost protection setting is continuous during the days it is set.
To set frost protection, press and hold the -/Hgel button until “HG : 01” appears. If used as a
group programmer all heaters will be set to frost protection. Press
+
++
+ or -
--
- to set the number of
days required for frost protection (99 days maximum) e.g. “HG : 04” = 4 days. Press OK to
confirm.
After the set frost protection period has elapsed, the heater automatically returns to the original
programme.
To cancel frost protection before the end of the set period, press -/Hgel to return to the registered
programme.
When slave heaters are connected to a master, it is possible to manually override the master
programme by turning the control button on each slave heater to the required position (comfort,
setback, frost protection or off). To cancel the manual override, turn back to the PROG position.
Display flashes and the timer cannot be adjusted: Exit the existing mode by pressing OK to return
to the beginning.
Cassette has been out of the heater for more than seven hours: Return to the heater to charge
(the internal battery lasts for seven hours).
WARNING
BEFORE UNDERTAKING CLEANING WORK ON THE CONTROLLER OR APPLIANCE
IMMEDIATELY DISCONNECT THE ELECTRICITY SUPPLY EITHER BY SWITCH OFF AT THE
ADJACENT DOUBLE POLE SWITCH.
The outside of the appliance should be wiped over with a soft damp cloth and then dried. Do not
use detergents or abrasives.
Your Dimplex Control is guaranteed for one year from date of purchase. We undertake to
exchange or repair free of charge within this period, any part found to be defective.
Should you require after sales service, please get in touch with the supplier through whom you
purchased the appliance, or your nearest Service Agent.
Please do not initially return a faulty appliance or part of an appliance to us as this may result in
transit damage and/or delay in providing service. Let us know your difficulty quoting the model
number and series of the appliance. We will then take the appropriate action.
Dimplex Manor House Avenue
Millbrook
Southampton
SO15 0AW
Customer Help Line (0870) 7270 101
Product Sales (0870) 7270 103
Head Office (0870) 0777 117
421AA0791.B00 NR/BLA 44/00
- 2/2 -

Termékspecifikációk

Márka: Dimplex
Kategória: nincs kategorizálva
Modell: RX9911

Szüksége van segítségre?

Ha segítségre van szüksége Dimplex RX9911, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Dimplex

Dimplex

Dimplex Optiflame 3D GLN20BR3D Útmutató

31 December 2025
Dimplex

Dimplex QRAD200E Útmutató

16 Október 2024
Dimplex

Dimplex CFH90 Útmutató

5 Október 2024
Dimplex

Dimplex OCR20Tie Útmutató

2 Október 2024
Dimplex

Dimplex OPH13 Útmutató

30 Szeptember 2024
Dimplex

Dimplex TDTR175C Útmutató

27 Szeptember 2024
Dimplex

Dimplex BYP20 Útmutató

22 Szeptember 2024
Dimplex

Dimplex GLN20BR Útmutató

19 Szeptember 2024
Dimplex

Dimplex DXC20TIE7 Útmutató

18 Szeptember 2024
Dimplex

Dimplex SRX120EM Útmutató

17 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025