Használati útmutató Dormakaba HTS-E01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dormakaba HTS-E01 (16 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.1 csillagra

Subject to change without notice

HTS-E01

Waist height turnstiles

Note

Dimensions are shown as

inches followed by millimeters;

for example, 1" (25).

HTS-E01 elevation drawings

Standard unitsHTS-E01

Construction

MaterialAISI 304 stainless steel.

Side barrier elementsMade of AISI 304 stainless steel tubing Ø1-7/8" (Ø48 mm),

mitered.

Rotating unitsWith tubular column Ø5-1/2" (Ø140 mm) made of AISI 304

stainless steel.

With three U-shaped barrier elements made of AISI 304 stainless

steel tubing Ø1-9/16" (Ø40 mm).

Locking system, drive and toothed clutch installed in tubular

column.

FinishStainless steel satin finish.

FunctionPower assist; servo-positioning drive/electrically controlled in 2

directions.

Passage side can be selected - inwards right or inwards left.

Electrical equipmentControl unit in external switch cabinet:

H 11-1/8" × W 6-5/8" × D 4-1/2" (H 283 mm × W 168 mm × D 115 mm).

Power supply110 – 230 VAC, 50/60 Hz, 253 VA.

In case of power failure both directions free

Standby power consumption15 VA.

InstallationFinished floor.

Suitable for outdoor installation.

Protection classesHousing IP43, components conducting supply voltage IP54.

Ø1-7/8"

(Ø48)

Ø5-1/2"

(Ø140)

12-5/8"

(320) 35-7/16"

(900)

40-1/4"

(1023)

22-3/8"

(568)

58-11/16"

(1491)

29-1/8"

(740)

29-9/16"

(751)

18/8"-7

(480)

18/8"-7

(480)

Ø51-3/16"

(Ø1300)

42-1/8"

(1070)

Termékspecifikációk