Használati útmutató Dormakaba HTS-M01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dormakaba HTS-M01 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.5 csillagra

Subject to change without notice

HTS-M01

Waist height turnstiles

HTS-M01 elevation drawings

Standard unitsHTS-M01

Construction

MaterialAISI 304 stainless steel / toughened safety glass, 3/8" (10 mm).

Side barrier elementsMade of AISI 304 tubular stainless steel, Ø1-7/8" (Ø48 mm),

mitered, with 8 mm tempered safety glass.

Rotating unit180° rotating unit; tubular column made of AISI 304 stainless

steel, Ø5-1/2" (Ø140 mm).

With two tall glass elements and stainless steel bar handles.

Locking system, drive, and toothed clutch installed in tubular

column.

HTS-M01 swing doorTubular column made of Ø5-1/2" (Ø140 mm) stainless steel with

3/8" (10 mm) TSG glass element and bar handle.

FinishStainless steel satin finish.

FunctionPower assist; servo-positioning drive/ electrically controlled in

both directions.

Electrical equipmentTwo control units in external switch cabinet:

H 11-1/8" × W 6-5/8" × D 4-1/2" (H 283 mm × W 168 mm × D 115 mm).

Power supply110 – 230 VAC, 50/60 Hz, 253 VA.

In case of power failure both directions free.

Standby power consumption15 VA.

InstallationFinished floor.

Not suitable for outdoor installation.

Protection classesHousing IP43, components conducting supply voltage IP54.

/8"44-7

(1140)

39/8"-3

(1000)

2"

(50)

35-7/16"

(900)

40-1/4"

(1023)

40-1/4"

(1023)

Ø1"

(Ø25)

Ø1-7/8"

(Ø48.3)

1-16"9/

(40)

55-13/16"

(1418)

73"-1/4

(1860)

23-7/16"

(595)

49-13/16"

(1265)

/8"44-7

(1140)

28-3/8"

(720)

Ø51-3/16"

(Ø1300)

Note

Dimensions are shown as

inches followed by millimeters;

for example, 1" (25).

Termékspecifikációk