Használati útmutató Dormakaba RCI 3510LM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dormakaba RCI 3510LM (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/2
INSTALLATION
RCI 3510LM
CABINET LOCK WITH LATCH MONITOR
ELECTRIC LOCK FOR SMALL ENCLOSURES
© 2020 dormakaba Canada Inc
www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.comIS3510LM
PCN2016
R10-20GR-1
WIRING INSTRUCTIONS
NOTE: This lock requires some sort of external control.
1. Connecting wire must be of sufficient gauge to prevent line loss.
The 3510LM Cabinet Lock operates on either 12 or 24 VAC/DC
For 12 volt operation: connect a wire jumper from terminal 1 to 2 and also from terminal 3 to 4.
For 24 volt operation: connect one wire jumper from terminal 2 to 3.
2. With voltage jumpers installed, connect the positive (+) lead from the power supply to terminal 1.
Connect the negative(-) lead from the power supply to terminal 4.
For DC voltage, the supplied diode must be connected across terminals 1 and 4.
For AC voltage, terminal 1 and 4 connections are not polarity conscious. The diode is not required.
3 . The latch monitor feature indicates whether the door is closed/locked or open/unlocked.
The monitor switch contacts are rated 1 Amp @ 25V maximum.
Connect terminals 5 or 6 and 7 to suit N/O or N/C monitor requirements.
LM FEATURE
++
_ _
LATCH MONI R SWITCHTO
OUTPUT CONTACTS RATED
1 AM @ 25VP
12V JUMPER
CONNECTION
24V JUMPER
CONNECTION
+
-
Operating Voltage 12VDC 12VAC 24VDC 24VAC
Amps 0.25A 0.25A 0.12A 0.12A

Termékspecifikációk

Márka: Dormakaba
Kategória: nincs kategorizálva
Modell: RCI 3510LM

Szüksége van segítségre?

Ha segítségre van szüksége Dormakaba RCI 3510LM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek