Használati útmutató Dormakaba RCI 8365
Dormakaba
nincs kategorizálva
RCI 8365
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dormakaba RCI 8365 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.2 csillagra
Oldal 1/3
INSTALLATION
RCI 8365
MicroMag MORTISE ELECTROMAGNETIC LOCK®
© 2019 dormakaba Canada Inc
www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.com
1. Mortise Cutouts
Hold lock against frame at desired level. Mark the lock’s horizontal
centerline on the frame and transfer that mark to the door.
Determine the vertical centerline of the door thickness and mark
this on both the door and the frame.
Using these centerline references, cut out the frame lock mortise
and the door armature mortise, as illustrated.
2. Lock Mounting Tabs
Temporarily fasten the two mounting tabs under the lock flanges.
Insert the lock assembly into the frame cavity until the tabs are
resting on top. Mark the location of the tab mounting holes.
Drill and countersink these four holes to accept the 3/16” screws
provided.
Remove tabs from lock. Mount the tabs inside the frame.
3. Wire and Mount Lock
Remove endcap.
Set voltage jumpers as follows:
12VDC operation = two jumpers are used.
Contact pins 1 to 2 and 3 to 4.
24VDC operation = only one jumper is used.
Contact pins 2 to 3. (factory setting)
Connect the positive (+) power lead to the red and the negative
(-) lead to the white wire.
Connecting wire should be
of sufficient gauge for the
lock being installed and the
distance being run.
See page 3 table for current
draw specifications.
Secure lock on tabs in
mortise cavity, carefully applying thread locking compound to the
hardware provided, as in Fig. 1
IS8365 PCN18041
R09-19GR-1
Instructions
Pre-Installation Instructions
1. This product must be installed according to all applicable
building and life safety codes.
2. Due to the variety of mounting configurations available with this
product, a survey and assessment of the physical area in which
the product will be installed must be performed.
3. The door frame must be inspected and deemed structurally
sound prior to installation of the electromagnetic lock. The
structural integrity of the mounting surfaces must be strong
enough to meet or exceed the holding force of the product.
4. The product must be protected from potential damage due to
intruders or tampering.
5. The product should be installed in a location that will not hinder
or create a potential safety hazard to authorized personnel
accessing the protected area.
6. Because electromagnetic locks are used in a variety of
applications and different door frame configurations, an
experienced installer with knowledge of this product must make
a determination of the optimal mounting method for this specific
application.
7. Do not install this product on the exterior of buildings.
8. Do not use as a doorstop. This will void warranty.
9. Installation of this product should be done by an experienced
installer with knowledge of this product.
NOTE: It is highly recommended that thread locking compound be
applied to all screws during installation to reduce chance of screws
loosening over extended time.
WARNING: Improper installation, maintenance, inspection or
usage of the product or any related accessories or parts may
cause the electromagnetic lock, armature plate and associated
hardware to disengage and fall, causing serious bodily injury and
property damage. dormakaba Canada Inc. and/or dormakaba
USA Inc. will not be liable to the installer, purchaser, end user
or anyone else for damage or injury to person or property due
to improper installation, care, storage, handling, maintenance,
inspection, abuse, misuse or act of God or nature involving this
product or any related accessories or parts.
PLEASE DELIVER ALL INSTALLATION INSTRUCTIONS TO
THE END-USER UPON COMPLETION OF THE INSTALLATION.
Termékspecifikációk
| Márka: | Dormakaba |
| Kategória: | nincs kategorizálva |
| Modell: | RCI 8365 |
Szüksége van segítségre?
Ha segítségre van szüksége Dormakaba RCI 8365, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Dormakaba
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva ETON
- nincs kategorizálva Heckler Design
- nincs kategorizálva Challenge
- nincs kategorizálva Morrison
- nincs kategorizálva HiFi ROSE
- nincs kategorizálva BabyBjörn
- nincs kategorizálva Simrad
- nincs kategorizálva Cellular Line
- nincs kategorizálva Aprilia
- nincs kategorizálva Armcross
- nincs kategorizálva Storcube
- nincs kategorizálva Mamas & Papas
- nincs kategorizálva Red Panda
- nincs kategorizálva Racktime
- nincs kategorizálva Diamex
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025