Használati útmutató Edimax GS-1008E
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Edimax GS-1008E (9 oldal) a kapcsoló kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/9

GS-1008E
Quick Installaon Guide
04-2016 / v1.0

2
Product Informaon
Package Contents
Before you start using this switch, please check if there is anything missing in
the package, and contact your dealer to claim the missing item(s):
GS-1008E Switch
Quick Installaon Guide
Power Adapter
Hardware Overview
LED Status
LED Name
Light
Status
Descripon
PWR
On
Switch is on
O
Switch is o
LNK/ACT
On
Corresponding port is connected
O
Corresponding port is not connected
Flashing
Corresponding port is active and transferring
/receiving data.
Power Port
Power Indicator
LED Indicators
24 X 10/100/1000Mbps RJ-45 Ports

3
Operang Environment
This switch must be installed and operated within the limits of the specied
operang temperature 0 - 40°C (32 - 104°F) and humidity (10 - 90%
non-condensing).
- Do not place objects on top of the unit.
- Do not obstruct any vents at the sides of the unit.
- Do not posion the unit close to any heang source such as a heater,
radiator or in direct exposure to sun.
- Take care to ensure the unit does not come into contact with water.
Consider using a dehumidier to reduce humidity and prevent moisture
entering the unit.
Connecng to network devices
The RJ-45 ports on the switch support Auto-MDI/MDI-X which allows either
straig -through or cross-over type cables to connect this switch to a ht
workstaon or switch.
Connect one end of the network cable to the RJ-45 port on the side panel, and
connect the other end of the network cable to the RJ-45 port on the network
device. Follow the same procedure to connect all RJ-45 ports of the switch.
The UTP network cables must comply with EIA/TIA 568 specicaons and
Category 5 standard for data transmission. The maximum length for a UTP
cable segment between the switch and connected devices is 100 meters
(300).
Once the network cable is connected to both ends and the aached network
device is powered on, the green LNK/ACT LED should be lit.
Termékspecifikációk
Márka: | Edimax |
Kategória: | kapcsoló |
Modell: | GS-1008E |
Szüksége van segítségre?
Ha segítségre van szüksége Edimax GS-1008E, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók kapcsoló Edimax
5 Október 2024
27 Szeptember 2024
28 Augusztus 2024
20 Augusztus 2024
4 Augusztus 2024
3 Augusztus 2024
2 Augusztus 2024
1 Augusztus 2024
31 Július 2024
30 Július 2024
Útmutatók kapcsoló
- kapcsoló Delta Dore
- kapcsoló ZyXEL
- kapcsoló Sylvania
- kapcsoló Adder
- kapcsoló Hikvision
- kapcsoló Victron Energy
- kapcsoló Elro
- kapcsoló Alcatel
- kapcsoló Konig
- kapcsoló Axing
- kapcsoló Paladin
- kapcsoló ConnectPro
- kapcsoló BZBGear
- kapcsoló Tripp Lite
- kapcsoló Jung
Legújabb útmutatók kapcsoló
9 Április 2025
9 Április 2025
5 Április 2025
5 Április 2025
5 Április 2025
5 Április 2025
3 Április 2025
3 Április 2025
2 Április 2025
2 Április 2025