Használati útmutató Ednet 91610
Ednet Lamináló rendszer 91610
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ednet 91610 (4 oldal) a Lamináló rendszer kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.2 csillagra
Oldal 1/4

Laminator, A4
Manual
91610
The laminator is only suitable for laminating documents. Any other use or modification shall
be deemed to be improper and involves substantial risk of accidents.
Important advice about safety
1.Read through these operating instructions carefully and completely before using the
machine for the first time.
2.Only put the machine on a flat and dry surface. It must be freely accessible from all sides.
It is not recommended to use an extension cable!
3.Do not open or repair the laminating machine yourself but take it to your specialized
dealer whenever it is damaged, or contact our service hot line.
4.Only use films of the correct size (up to DIN A4 max.) and thickness (80 to 100 microns).
Films that are too thin cause a blockage of the film in the machine.
5.Do not touch the hot surface of the machine after it has started up.
6.The laminating machine is not allowed - for safety reasons - to be used by children,
unless they are supervised by an adult.
7.Never use the machine outdoor or near water.
8.Hot lamination: do not laminate in this mode any materials that are sensitive to heat
with this machine, like thermo-fax paper for example. These materials are only suitable
for cold lamination.
9.Do not pour or spill any liquid into the machine or onto it.
Termékspecifikációk
| Márka: | Ednet |
| Kategória: | Lamináló rendszer |
| Modell: | 91610 |
Szüksége van segítségre?
Ha segítségre van szüksége Ednet 91610, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lamináló rendszer Ednet
11 Augusztus 2024
Útmutatók Lamináló rendszer
Legújabb útmutatók Lamináló rendszer
13 Január 2025
10 Január 2025
5 Január 2025
5 Január 2025
5 December 2024
7 Október 2024
30 Szeptember 2024
29 Szeptember 2024
27 Szeptember 2024
4 Szeptember 2024