Használati útmutató Electro Harmonix Switchblade

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Electro Harmonix Switchblade (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.2 csillagra

SWITCHBLADE

Channel Selector

Congratulations! You have just purchased the Switchblade Channel Selector. The

Switchblade is capable of carrying out all of your simple switching needs, without

having to worry about batteries and power adaptors.

-OPERATION-

FOOTSWITCH

— Switches the Y jack connection between the A jack and B jack.

The Switchblade can be used in two directions, meaning the signal path can flow from A/B to

Y,

or

from Y to A/B.

Using the Switchblade to switch between two instruments: plug the instruments into jack A

and jack B using ¼” instrument cables. Then connect jack Y to the next device in your signal

chain (effects, if any, or amplifier if none). Use the footswitch to switch between the

instruments.

Using the Switchblade to switch between two amplifiers: plug the amplifiers into jack A and

jack B using ¼” instrument cables. Then connect jack Y to the previous device in your signal

chain (effects, if any, or instrument if none). Use the footswitch to switch between

amplifiers.

The Switchblade is not limited the above two applications. Here are two more application

examples:

Y: Instrument

→

Effects chain A, effects chain B

Y: Amplifier head

→

Speaker cabinet A, speaker cabinet B (be sure to use

speaker

cable and not instrument cable for this application).

The Switchblade is a passive device and requires no power supply, such as a battery or

power adapter. The Switchblade does not support stereo use and will only work with ¼”

mono cables.

-WARRANTY INFORMATION-

Please register onlineathttp://www.ehx.com/product-registration or complete and returnthe enclosed

warranty card within 10 days of purchase. Electro-Harmonixwill repair or replace, at its discretion,a product

that fails to operate dueto defects inmaterials or workmanship for aperiod of one year from date of

purchase. This applies only to original purchasers whohave bought their product from an authorized Electro-

Harmonix retailer. Repaired or replaced units will thenbe warranted for the unexpired portion of the original

warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate

office listed below. Customers outside the regions listed below, please contactEHX Customer Service for

information onwarranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please

obtainaReturn Authorization Number(RA#) from EHX Customer Service before returning your product.

Includewith your returned unit:a written description of the problem as wellas your name, address,

telephonenumber, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE

ELECTRO-HARMONIX

c/o NEW SENSOR CORP.

47-50 33RDSTREET

LONG ISLAND CITY, NY 11101

Tel: 718-937-8300

Email: info@ehx.com

Europe

JOHNWILLIAMS

ELECTRO-HARMONIX UK

13 CWMDONKIN TERRACE

SWANSEA SA2 0RQ

UNITED KINGDOM

Tel: +44 179 247 3258

Email:electroharmonixuk@virginmedia.com

This warranty gives a purchaser specific legalrights.A purchaser may have even greater rights depending

uponthelaws of thejurisdictionwithinwhich the product was purchased.

To hear demos onall EHX pedals visitus on the web atwww.ehx.com

Emailus atinfo@ehx.com

FCC COMPLIANCE

Note:

Thisequipmenthasbeentested andfoundtocomplywiththelimits for aClassB digitaldevice,

pursuanttopart15oftheFCCRules.Theselimits aredesigned toprovidereasonableprotectionagainst

harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses and canradiateradio

frequency energy and,ifnotinstalled and used inaccordancewiththeinstructions,maycauseharmful

interferencetoradiocommunications.However,thereis noguaranteethatinterferencewillnotoccurina

particular installation. Ifthis equipment does causeharmful interference to radio or television reception,which

canbedetermined by turning theequipmentoffand on,theuser is encouraged totrytocorrectthe

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation betweenthe equipmentand receiver.

•

Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiver is

connected.

•

Consult the dealer or anexperienced radio/TV technician for help.

Modifications notexpresslyapproved by themanufacturercouldvoidtheuser's authoritytooperatethe

equipmentunder FCC rules.

Termékspecifikációk