Használati útmutató Electronics International OPT-1 (14 oldal)

Oil Pressure/Temp (OPT-1)Oil Pressure/Temp (OPT-1)

Oil Pressure/Temp (OPT-1)

OI 0520911

5/20/91

Rev. C: 10/8/97 *

OPT-1 S/N:OPT-1 S/N:

OPT-1 S/N:

PT-100GA S/N:PT-100GA S/N:

PT-100GA S/N:

You must read this manual before installing or operating the instrument. This

manual contains warranty and other information that may affect your decision

to install this product and/or the safety of your aircraft.

(Primary Replacement Instrument)(Primary Replacement Instrument)

(Primary Replacement Instrument)

Operating and Installation InstructionsOperating and Installation Instructions

Operating and Installation Instructions

Electronics International Inc.Electronics International Inc.

Electronics International Inc.

63296 Powell Butte Hwy • Bend, OR 97701 • (541) 318-6060 • www.Buy-EI.com63296 Powell Butte Hwy • Bend, OR 97701 • (541) 318-6060 • www.Buy-EI.com

63296 Powell Butte Hwy • Bend, OR 97701 • (541) 318-6060 • www.Buy-EI.com

®®

®

Important NoticeImportant Notice

Important Notice

***** MUST READ ********** MUST READ *****

***** MUST READ *****

If you think it is not important to read this manual, you're wrong!If you think it is not important to read this manual, you're wrong!

If you think it is not important to read this manual, you're wrong!

This manual contains important installation information that may affectThis manual contains important installation information that may affect

This manual contains important installation information that may affect

the safety of your aircraft, delay your installation or affect the operationthe safety of your aircraft, delay your installation or affect the operation

the safety of your aircraft, delay your installation or affect the operation

of your instrument. You of your instrument. You

of your instrument. You

MustMust

Must

read this manual prior to installing your read this manual prior to installing your

read this manual prior to installing your

instrument. instrument.

instrument.

Any deviation from these installation instructions is the soleAny deviation from these installation instructions is the sole

Any deviation from these installation instructions is the sole

responsibility of the installer/pilot and may render the STC invalid.responsibility of the installer/pilot and may render the STC invalid.

responsibility of the installer/pilot and may render the STC invalid.

Read the Warranty / AgreementRead the Warranty / Agreement

Read the Warranty / Agreement. There is information in the Warranty / Agreement that may

alter your decision to install this product.

If you do not accept the terms of the Warranty /If you do not accept the terms of the Warranty /

If you do not accept the terms of the Warranty /

Agreement, do not install this productAgreement, do not install this product

Agreement, do not install this product. This product may be returned for a refund. Contact

Electronics International inc. for details.

Check that the instrument make and model marked on the side of the instrument and on the

invoice are correct before starting the installation.

Check that the limit information on this instrument matches the published limits in your aircraft's

P.O.H. or Flight Manual. Also, this information may be listed in the T.C. Data Sheet for your aircraft.

Any AD's and/or STC's may set forth additional limitations on the operation of your engine. The

limit information listed in the AML is for unmodified aircraft and is intended for reference only.

It isIt is

It is

the aircraft owner's and/or installer's responsibility to determine proper instrumentthe aircraft owner's and/or installer's responsibility to determine proper instrument

the aircraft owner's and/or installer's responsibility to determine proper instrument

calibration and range markings for your aircraft.calibration and range markings for your aircraft.

calibration and range markings for your aircraft.

On the front of this instrument you will find two red lights marked with the maximum oil pressure

and temperature information. If there are any additional red or yellow lights on this instrument, the

operating range of these lights can be found on a sticker located on the side of the instrument (see the

AML at the back of this manual to decode this information). This instrument designates any "Caution

Range" with yellow LEDs, any "Maximum and Minimum Limits" with Red LEDs and the "Safe

Operating Range" with green LEDs. The "Safe Operating Range" on this instrument is equivalent to

the green "Normal Operating Range" and any unmarked areas on a analog gauge.

It is possible for any instrument to fail thereby displaying inaccurate high, low or jumpy oil

pressure or temperature readings. Therefore, you must be able to recognize an instrument failure and

you must be proficient in operating your aircraft safely in spite of an oil pressure or temperature

instrument failure. If you do not have this knowledge, contact the FAA or a local flight instructor for

training.

The pilot

must must

must understand the operation of this product before flying the aircraft. Do not allow

anyone to operate the aircraft that does not know the operation of this product.

Keep the Operat-Keep the Operat-

Keep the Operat-

ing Manual in the aircraft at all times.ing Manual in the aircraft at all times.

ing Manual in the aircraft at all times.

Rev: C 10/8/97

1

ContentsContents

Contents

WW

W

arranty ...........................................................................arranty ...........................................................................

arranty ...........................................................................

22

2

Operating Instructions......................................................Operating Instructions......................................................

Operating Instructions......................................................

33

3

Instrument: ........................................................................................................ 3

Analog Display: ................................................................................................ 3

Digital Display (Oil Pressure): .......................................................................... 3

Digital Display (Oil Temperature): .................................................................... 4

Installation Instructions ...................................................Installation Instructions ...................................................

Installation Instructions ...................................................

44

4

Important Information and Initial Check Out: .................................................... 4

Route The Circular Connector: ......................................................................... 5

Route the Power and Ground Wires: ................................................................ 5

Route the Backlight Wires: ............................................................................... 6

Route the (Optional) External Warning Control Line: ...................................... 6

Install the Oil Pressure Transducer: ................................................................... 6

Install the Oil Temperature Probe: ..................................................................... 7

Route the Oil Temperature Extension Cable: .................................................... 7

Route the Pressure Transducer Extension Wires: .............................................. 8

Install the Instrument in the Panel: ..................................................................... 8

Connect the Circular Connector to the Instrument: ........................................... 8

Check Instrument Operation: ............................................................................ 8

Wiring Diagram ................................................................Wiring Diagram ................................................................

Wiring Diagram ................................................................

1010

10

OPTOPT

OPT

-1 Circular Connector ...............................................-1 Circular Connector ...............................................

-1 Circular Connector ...............................................

1111

11

Specifications and Operating Features .........................Specifications and Operating Features .........................

Specifications and Operating Features .........................

1212

12

STC Information .............................................................STC Information .............................................................

STC Information .............................................................

1313

13

Márka:	Electronics International
Kategória:	Mérőberendezések
Modell:	OPT-1

Használati útmutató Electronics International OPT-1

Termékspecifikációk

Szüksége van segítségre?

Útmutatók Mérőberendezések Electronics International

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések