Használati útmutató Enttec 8PX60-12-B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Enttec 8PX60-12-B (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/3
8PX60-12-B Datasheet
For latest version visit:
www.enttec.com
8 February 2019 M-file ID 4902755 Page|1
8PX60-12-B
12 V 60 PIXEL/METER BLACK STRIP
Features
RGB, 3 in 1 full colour LED pixel strip.
Individually addressable led pixels, suitable
for stage, entertainment and architectural
applications
60 Pixels/meter density
Designed for use with ENTTEC Pixel products
Maximum 8.5 Watts/Metre
WS2815 chips built into 5050 RGB LEDs
256 grayscale
120-degree illumination without dark area
3M adhesive double side tape at the back
Built-in data signal reshaping circuit
12V DC input supply voltage
Flexible construction material
Small LED pitch
Can be joined together
Can be cut into a smaller length
IP20 Indoor use only
Back up data line BI/BO (In/Out)
Physical Dimensions
Note
All dimensions are in mm
Safety
Do not expose this pixel strip to rain
Do not allow liquid to build up around the pixel
strip.
Do not exceed the rated 12V DC power supply.
Please adhere to installation instruction sheet
This unit is intended for indoor use only, use of
this product outdoors voids all warranties.
Do not put excess pressure on the pixel strip,
as it can damage the LEDs.
Pixel strips produce heat; ensure proper
thermal management with the use of
extrusions
Ordering Information
Part Number
Description
8PX60-12-B
RGB PIXEL STRIP 60
LEDs/METER 12V
5meter roll BLACK

Termékspecifikációk

Márka: Enttec
Kategória: nincs kategorizálva
Modell: 8PX60-12-B

Szüksége van segítségre?

Ha segítségre van szüksége Enttec 8PX60-12-B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek