Használati útmutató Epson WorkForce 60

Epson nyomtató WorkForce 60

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Epson WorkForce 60 (4 oldal) a nyomtató kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/4
Start Here
Read these instructions before using your product.
1 Unpack
Power cordUSB cable
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2 Turn on
1 Connect the power cable.
Do not connect to your computer yet.Caution:
2 Press the button.Power
3 Install ink cartridges
1 Lift up the printer cover.
2 Open the cartridge cover.
3 Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals or the cartridges may
leak.
5 Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
6 Close the cartridge cover. Press down until it clicks.
7 Lower the printer cover.
8 Press the button to prime the ink delivery system. Ink
This takes several minutes.
Note: Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution: Don’t turn off the printer while it is priming or you’ll
waste ink.
*411961800*
*411961800*

Termékspecifikációk

Márka: Epson
Kategória: nyomtató
Modell: WorkForce 60

Szüksége van segítségre?

Ha segítségre van szüksége Epson WorkForce 60, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek