Használati útmutató Epson WorkForce Pro WP-4090

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Epson WorkForce Pro WP-4090 (4 oldal) a nyomtató kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 5.0 csillagra

Start Here

Read these instructions before using your printer.

1Unpack

Caution: Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all tape and protective materials, including the foam and

plastic inside the printer.

2Turn on

1 Connect the power cord to the back of the printer and to an

electrical outlet.

Do not connect to a computer yet.Caution:

2Press the power button.

3Install ink cartridges

1 Open the front cover.

2Unpack the four ink cartridges.

3 Shake each cartridge as shown for about 5 seconds.

4 Install each cartridge in the correct slot for its color.

Push each cartridge in until it clicks.

5 Close the front cover.

The printer starts priming the ink. This takes about 12

minutes. When the green power light stops flashing,

priming is complete.

Note: The included cartridges prime the printer and print about 1000

black pages/900 color pages. Actual page count may vary.

Caution: Don’t turn off the printer or open the cover while it is

priming or you’ll waste ink.

*412216300*

*412216300*

WorkForce® Pro WP-4090

Termékspecifikációk