Használati útmutató Etymotic TV HearGear

Etymotic fejhallgató TV HearGear

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Etymotic TV HearGear (2 oldal) a fejhallgató kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
Quick Start Guide
Before continuing please be sure your devices are fully charged before
continuing on with this guide.
Guide 1 Pairing your devices
The devices should now find each other and pair together. You will know they are paired when both
flashing blue lights go to a slow blue flashing state. Anytime you turn on both devices they will
automatically connect. If they do not, please refer to steps 3–6. Please see further instructions on
page 2 for connecting your transmitter to your television.
AUX
SPDIF RX
1
A
You can find the
MicroUSB port
on the back of your TV
HearGear transmitter.
A
2
Plug MicroUSB cable
(included) into MicroUSB
port on the back of TV
HearGear transmitter.
3
Make sure the switch
on the side of the
transmitter is set to the
“TX” setting.
4
Hold the power
button for 2 seconds
to turn transmitter on.
5
Press the pairing button
on the transmitter until you
see a quick flashing blue light.
Note: that if you see a blue and red
alternating light on the transmitter, you
are in the RX setting and you should go
back to Step 3.
6
Press and hold the
power button on the
Earphone for 3 seconds
or until you see a quick
flashing blue light.
B
B
TX RX
TX RX
A
A
B
B
C
C
D
D
To pair a second set of earphones, for dual listening capabilities,
please repeat steps 5 and 6 using a second earphone device.
Light on front of transmitter will be solid green when
connected to 2 devices.
D
With first set
already paired,
repeat steps 5
and 6 on second
set of earphones.

Termékspecifikációk

Márka: Etymotic
Kategória: fejhallgató
Modell: TV HearGear

Szüksége van segítségre?

Ha segítségre van szüksége Etymotic TV HearGear, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek