Használati útmutató Exibel L303-A

Exibel Lamináló rendszer L303-A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Exibel L303-A (5 oldal) a Lamináló rendszer kategóriában. Ezt az útmutatót 27 ember találta hasznosnak és 14 felhasználó értékelte átlagosan 4.4 csillagra

Letöltés PDF

Oldal 1/5

GREAT BRITAIN - CUSTOMER SERVI CE contact number: 020 8247 9300 e-mail: customerser vice@clasohlson.co.uk internet: ww w.clasohlson.co.uk postal: 10 – 13 Market Place , Kingston Upon Thames, Surrey, KT1 1JZ

English

Ver. 20180205

A3 Laminator

Art.no 34-1402 Model L303-A

Please read theentire instruction manual before using theproduct and

save it for future reference. We reserve theright for any errors in text

or images and any necessary changes made to technical data. If you

have any questions regarding technical problems please contact our

Customer Services.

Safety

• Unplug thelead before cleaning.

• The laminator may not be used by children without thesupervision

of anadult.

• Do not insert any metal objects like paperclips, coins, etc. into

themachine.

• Do not insert anything other than lamination ﬁlm into themachine.

• Do not disassemble thelaminator or attempt to repair it yourself.

Thelaminator must not be modiﬁed in anyway.

• The laminator may produce aburnt odour when ﬁrst used.

Thisis completely normal.

• Do not touch any of themachine’s hot surfaces. Burninjuries

may result.

• Never use thelaminator in humid environments or near sources

of water, e.g sinks, taps, etc.

• The mains lead should be checked regularly. Neveruse theproduct

if themains lead or its plug is damaged or if theproduct is not

functioning properly.

• If themains lead is damaged, it must only be replaced by aqualiﬁed

service technician in order to prevent any risk of ﬁre or electric shock.

• Never lay themains lead over hot surfaces or pull it round sharp

edges or corners. Position themains lead in such away that it will

not be trodden on or tripped over.

Product description

• Two rollers

• Capacity: 250 mm/min 80–100 µm, maxA3

• 3–4 min warm-uptime

• Max. paper thickness: 0.5mm

• Reverse feature for correcting misfeeds

• Power output: 300W

1. Film feedslot

2. [ 0/1 ] Power switch

3. POWER Red LED indicator

4. READY Green LED indicator

5. [ ABS ] Reverse function

6. Output chute

Operation

Make sure thepower switch (2) is set to before plugging it into 0

awall socket.

1. position. Plugit into awall socket and set thepower switch (2) to theI

Thered LED (3) will light to indicate that thewarm-up phase hasbegun.

2. Thegreen LED will light after about 3–4 minutes indicating

that thelaminator is ready for use. Makesure that there is

sufﬁcient room behind themachine to allow thelamination to exit

themachine freely.

3. Flipopen thelamination ﬁlm and insert thepaper to be laminated.

Allowat least 3–10 mm clearance at thesealed edge when

inserting. Makesure thepaper is not crooked.

4. Feedthesealed end of thelamination ﬁlm into thefeed slotﬁrst.

Note: Thisis very important; otherwise, thelamination ﬁlm can

become caught in therollers.

5. Lettheentire lamination exit freely. Donot pull it out with force.

Letit cool before handling it. Placeaﬂat heavy object, like abook

over thelaminate while cooling if you want your results to be extra

smooth andﬂat.

6. Setthepower switch to and unplug thelaminator when you have 0

ﬁnished usingit.

Note:

• Selectthecorrect size of lamination ﬁlm so that it ﬁts theobject to

be laminated.

• Avoidplacing several small pieces of paper into asingle lamination

sheet.

• Remember that thelaminate’s total thickness may not exceed0.5mm.

• Donot feed in empty lamination ﬁlm.

• Donot cut thelamination ﬁlm into smaller pieces before feeding it

through themachine.

• Donot feed theﬁlm into themachine at anangle. Itcanbecome

caught in themachine during thelaminationprocess.

• Useonly lamination ﬁlm. Nevertry to feed in any other typeof material.

• Ifyou intend to laminate in series, remember themachine needs to

rest at least 15 seconds between every lamination.

• Donot feed in any material that is sensitive toheat.

The laminator is intended for personal use only and should not be

used continuously. Werecommend that you turn off themachine and

let it cool down for approximately 30 minutes after 2 hours ofuse.

Reverse feature for correcting misfeeds

The machine has a feature which allows the laminate to be pulled out

from the front. If the lamination ﬁlm misfeeds or jams:

1. Turn off the laminator immediately by turning the power switch to

the position and then unplug it.0

2. Hold in the [ ABS ] button and extract the laminate.

Care and maintenance

Unplug thelaminator from thewall socket and wipe it with asoft,

damp cloth when needed. Neveruse strong detergents orsolvents.

Responsible disposal

This symbol indicates that this product should not be

disposed of with general household waste. This applies

throughout theentire EU. In order to prevent any harm to

theenvironment or health hazards caused by incorrect

waste disposal, theproduct must be handed in for recycling

so that thematerial can be disposed of in aresponsible

manner. When recycling your product, take it to your local collection

facility or contact theplace of purchase. They will ensure that

theproduct is disposed of in anenvironmentally sound manner.

Specifications

Rated voltage 220–240 V AC, 50Hz

Power 300 W, 1.4A

Max lamination width 320mm

Speed 250 mm/minute

Recommended

lamination ﬁlm thickness 80–100 microns

Dimensions 425×125×100mm

1 2 3 4 5 6

Termékspecifikációk

Márka:	Exibel
Kategória:	Lamináló rendszer
Modell:	L303-A

Szüksége van segítségre?

Ha segítségre van szüksége Exibel L303-A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Lamináló rendszer Exibel

Exibel L303-A Útmutató

20 Augusztus 2024

Exibel LA3G Útmutató

20 Augusztus 2024

Útmutatók Lamináló rendszer

Legújabb útmutatók Lamináló rendszer

Fellowes Saturn 2 A3/125 Útmutató

13 Január 2025

SEAL 65 EL Útmutató

10 Január 2025

GBC Catena 65 Útmutató

5 Január 2025

SEAL 65ProMD Útmutató

5 Január 2025

GBC Pinnacle 27 Útmutató

5 December 2024

GBC Swingline Fusion 5000L Útmutató

7 Október 2024

Fellowes SPL A2 Útmutató

30 Szeptember 2024

Fellowes Voyager Útmutató

29 Szeptember 2024

Fellowes Halo A3/125 Útmutató

27 Szeptember 2024

Fellowes SPL A3 Útmutató

4 Szeptember 2024