Használati útmutató Extron 70-1065-30

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Extron 70-1065-30 (130 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.6 csillagra

Retractor SM Horizontal Bracket • Installation Guide

The Cable Retractor SM series requires this mounting bracket for horizontal

installations. Use the Horizontal Mounting Bracket to x the Retractor under the

table. Slotted holes allow for tolerance in placing the bracket.

See the at Retractor SM Installation Guidewww.extron.com prior to beginning this

installation.

ATTENTION:

• Ensure the supplied screws do not pierce through the top of the table. If

necessary, use appropriate screws based on the table material and thickness.

• Assurez vous que les vis fournies ne transpercent pas la surface de la table. Si

nécessaire, utilisez des vis plus appropriées en fonction du matériau de la table

et de son épaisseur.

Trace around

bracket perimeter.

End Caps

NOTE:Be certain the system is perpendicular to the enclosure to prevent

binding of the pulley system.

3. Ensure the bracket is ush with surface and trace a line around the bracket

perimeter.

4. Lower the assembly and remove the Horizontal Bracket from the Retractors.

To ensure accuracy follow these procedures:

1. With the Retractors installed in the enclosure, attach the horizontal mounting

bracket to the Retractor end caps using the provided pin and clip.

2. Raise the Retractors with attached

bracket to the desired mounting

location.

Termékspecifikációk