Használati útmutató Extron DA HD 8K L

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Extron DA HD 8K L (92 oldal) a Kantoortelefoon kategóriában. Ezt az útmutatót 34 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.0 csillagra

1

DA4 HD 8K L and DA6 HD 4K L • Setup Guide

IMPORTANT NOTE:

Go to www.extron.com for the complete user guide, installation instructions, and specications before connecting

the product to the power source.

This guide provides basic instructions for an experienced technician to install the DAHD8K L distribution ampliers.

Overview

The Extron DA4 HD 8K L and DA6 HD 8K L distribution ampliers distribute one HDMI input signal to four or six outputs

simultaneously at resolutions up to 8K @ 30 Hz 4:4:4 or 8K @ 60 Hz 4:2:0, and comply with HDMI 2.1 and HDCP 2.2. The DAs also

feature EDID Minder

®

Plus, remote control and monitoring via Ethernet, USB, or RS-232, and discrete display control via CEC.

For complete instructions, see the DA HD 8K L Series User Guide at www.extron.com.

Front Panel

DA4 HD 8K L

CONFIG

INPUT

1

SIGNAL

HDCP

e

234

OUTPUTS

DA6 HD 8K L

CONFIG

INPUT

1

SIGNAL

HDCP

e

23456

OUTPUTS

A

A

A

A

A

AC

C

C

C

C

CB

B

B

B

B

BD

D

D

D

DD

A

— Lights when power is applied to the unit.Power status LED

B

USB-C Config port — Connect a PC to this port to configure and monitor the DA via Simple Instruction Set (SIS™™) or

Product Configuration Software (PCS).

C

— Input LEDs

•Signal LED — Lights when a TMDS signal is detected on the HDMI input. If the source requires HDCP encryption, this LED

may light only when HDCP is authenticated.

•HDCP LED — Lights when the source requires HDCP encryption and it has been authenticated with the HDMI input.

D

— Outputs LEDs

•HDCP LEDs — Light when HDCP is authenticated between a DA output and the corresponding sink device.

•Signal LEDs — Light when HPD is detected from the corresponding sink device and a TMDS signal is detected at the

input.

Rear Panel

POWER

12V

--A MAX

2143

INPUT

REMOTE

OUTPUTS

LAN

RS-232

TxRxG

R

POWER

12V

--A MAX

216345

INPUT

REMOTE

OUTPUTS

LAN

RS-232

TxRxG

R

D

D

D

D

DD

A

A

A

A

AA

B

B

B

B

BB

E

E

E

E

E

EF

F

F

F

FF

C

C

C

C

CC

A

Power input — Connect the provided 12 VDC, 3.0 A power supply to this 2-pole 3.5 mm captive screw port (see the power

Attention and diagram to wire the connector on ).page 2

Termékspecifikációk