Használati útmutató Extron IN1806

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Extron IN1806 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/6
1
IMPORTANT:
Go to www.extron.com for the complete
user guide, installation instructions, and
specifications before connecting the
product to the power source.
IN1806 • Setup Guide
The Extron IN1806 is a six input seamless scaling presentation switcher that supports signal resolutions up to 4K @ 60 Hz at
4:4:4. It features DisplayPort and HDMI inputs, an HDMI output, and a mirrored Extron DTP2 output for extending video, audio,
and control signals up to 330 feet (100 meters) over a shielded CATx cable. The IN1806 delivers high image quality, fast and
reliable switching, Extron ProDSP audio processing, seamless video transition effects, logo keying, and HDMI loop-out. The
scaler can be controlled and congured over Ethernet, RS-232, or USB.
This guide provides instructions for an experienced user to set up and congure the IN1806 scaler. It covers how to perform basic
NOTES:
For full installation, configuration, menus, connector wiring, and operation details, see the IN1806 and IN1808 Series
User Guide at www.extron.com.
The IN1806 can also be configured via the Extron Product Configuration Software (PCS), available at
www.extron.com. For information on using PCS, see the IN1806 and IN1808 Series Help File.
Installation
Rear Panel Features
100-240V 0.7A MAX ~
31
2
5
4 6
HDMI/CEC
INPUTS AUDIO INPUTS OUTPUTS REMOTE
OVER TP
IN1806
1A 1B
SIG LINK
OUT
Tx Rx
RS-232
GTx Rx
IR
G
RESET
1 2
3 4
+48V
+48V
1
2
MIC/LINE
L R
AUX
3 4
LAN
LOOP OUT
A
C
H
M
N
B
D E
F
G
I
J
K
L
O
OUTPUTS (DTP2/XTP/HDBT)
50-60 Hz
A
AC power connector
B
DisplayPort input connector (input 1)
C
HDMI (with CEC) loop out connector
D
HDMI (with CEC) output connector (1A)
E
DTP2/XTP/HDBaseT (with CEC)
output connector (1B)
F
Over TP IR pass-through connector
G
Analog line audio inputs 3 and 4
H
Analog mic/line audio inputs 1 and 2
and adjacent phantom power LEDs
I
Analog line audio outputs 1 through 4
J
LAN connector
K
Remote RS-232 port
L
Reset LED
M
Reset button
N
Aux mono or stereo analog
line audio input connector
O
HDMI inputs 2 through 6
Figure 1. Rear Panel Connectors — IN1806
Mounting and Cabling
Step 1 Mount the device
a. Turn off or disconnect all equipment power sources.
b. Mount the IN1806 to a rack using the pre-installed side mounting brackets, or remove the brackets and use an optional
19-inch kit for under-desk mounting (see the instructions provided with the mounting kit, available at www.extron.com).
Step 2 Connect inputs
a. Make the following video input connections as needed:
Connect a DP source to the Input 1 DisplayPort connector (see figure 1,
B
).
Connect digital HDMI or DVI (with an appropriate adapter) sources to HDMI input connectors 2 through 6 (
O
).
b. Connect analog audio sources to:
The 5-pole captive screw line audio input connectors 3 and 4 (
G
) and the Aux connector (
N
) for balanced or
unbalanced stereo audio. The Aux Line input (
N
) is shared and can be associated with one or more video inputs.
Connect balanced or unbalanced mic or line level inputs to 3-pole Mic/Line captive screw connectors 1 and 2 (
H
).
These inputs support optional +48 VDC phantom power, which is indicated by the LEDs at the left of the connectors.

Termékspecifikációk

Márka: Extron
Kategória: nincs kategorizálva
Modell: IN1806

Szüksége van segítségre?

Ha segítségre van szüksége Extron IN1806, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek