Használati útmutató Extron TLP Pro 525C
Oldalak 10 Engels Monitor
Olvassa el ingyen online a(z) Extron TLP Pro 525C használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 33 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
1
TLP Pro 525C Series • Setup Guide
Overview
The Extron TLP Pro 525C is a 5-inch Cable Cubby touchpanel. It has a ip-up, 800x480 (WVGA), LCD touchscreen with
24-bit color depth. The TLP Pro 525C NC is a streamlined model, with a set of features that adhere to government and military
security protocols.
These touchpanels are suitable for any AV application requiring a Cable Cubby touchpanel with a customizable interface.
This guide provides instructions for experienced installers to mount and install these touchpanels. For more complete instructions,
see the TLPPro 525C and 725C Series User Guide at www.extron.com.
Setup Checklist
Get Ready
Download and install the latest version of the following software:
GUI Designer — For designing layouts for Extron TouchLink
®
Pro touchpanels and third party touch interfaces.
Global Configurator
®
Professional and Global Configurator Plus — For setting up and conguring the control
processor and touchpanel.
Toolbelt — Provides device discovery, device information, rmware updates, and conguration of network settings,
system utilities, and user management for TouchLink Pro devices.
Global Scripter
®
— Provides an integrated development environment for Extron control systems programming.
NOTE:All four software programs are available from www.extron.com.
Obtain the following network information from your network administrator:
DHCP status — (on or off). If DHCP is off, you must also obtain:
IP address Subnet maskGateway
User name — This can be either admin or user.
Password — The factory congured passwords for all accounts on this device have been set to the device serial
number. Passwords are case sensitive.
NOTE:If the device is reset to default settings, the password will be the default password conguration. The default
password is extron (for either admin or user).
Make a note of the touchpanel MAC address.
Make sure you are familiar with all the included parts and have all the necessary Tools Required for Installation (see
page 4) for installing the cable cubby.
Included Parts
Check that all the following parts are included:
3/8” Hole Plug (4)1/4” Hole Plug (1)
#6-32 Screw (4)#6 Star Washer (4)
TLP Pro 525C or
TLP Pro 525C NC (1)
2-space
MAAP Frame (1)
TLP Pro 525C
Connectivity
Bracket (1)
Short Clevis Pin (1)
Cotter Pin (1)
HDMI Lockit (1)
Tie wrap (1)
5-cable Pass-through
Plate (1)
Figure 1. TLP Pro 525C Included Parts
NOTE:Active or passive MAAPs must be purchased separately (see www.extron.com).
Termékspecifikációk
| Márka: | Extron |
| Kategória: | Monitor |
| Modell: | TLP Pro 525C |
Szüksége van segítségre?
Ha segítségre van szüksége Extron TLP Pro 525C, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Monitor Extron
Extron TLP Pro 1525MG Útmutató Extron TLP Pro 1725TG Útmutató Extron TLS 300M Útmutató Extron TLP Pro 1725MG Útmutató Extron TLP Pro 1525TG Útmutató Extron TLP Pro 725M Útmutató Extron TLP Pro 525T Útmutató Extron TLS 1025M Útmutató
Összes Extron Monitor használati útmutató