Használati útmutató Fantini Cosmi S71

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fantini Cosmi S71 (2 oldal) a Gázdetektor kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
8
S71-S72
Gas detection sensors for control units P30A
Combustible gas detection sensors to be used with the electronic control units P30A. The sensors are available
in 2 versions: S71 for methane gas and city gas, S72 for LPG.
INSTALLATION
Wall mounting.
Detection sensors should be fixed on the wall at a distance of approximately 2 meters from the gas using device in such position in
order to allow natural air circulation:
S71 for specific light gases (methane gas, city gas), this sensor has to be installed at a high level approximately 30-40 cm from
the ceiling.
S72 for heavy gases (cylinder liquid gas LPG), this sensor has to be installed to a low level approximately 30-40 cm above the floor.
Avoid installing the sensors:
behind barriers that hinder the air natural circulation in the environment.
near vents (keeping a minimum distance of 2 meters).
away from steam, smoke and other fumes.
Remove the cover by unscrewing the four front screws.
Install the base on the wall using for the cable input the appropriate cable gland.
76
128
65
Dimensions (mm)
Gas type Operating ambient
temperature
Protection
degree
S71 Methane gas, or other light gases - 10 ÷ 50 °C IP54
S72 LPG gas (cylinder liquid gas) or other heavy gases - 10 ÷ 50 °C IP54
B
C
A

Termékspecifikációk

Márka: Fantini Cosmi
Kategória: Gázdetektor
Modell: S71

Szüksége van segítségre?

Ha segítségre van szüksége Fantini Cosmi S71, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Gázdetektor Fantini Cosmi

Útmutatók Gázdetektor

Legújabb útmutatók Gázdetektor