Használati útmutató FeiyuTech MG Lite
FeiyuTech
nincs kategorizálva
MG Lite
Olvassa el alább 📖 a magyar nyelvű használati útmutatót FeiyuTech MG Lite (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 3.9 csillagra
Oldal 1/1
[2] Motor knob ring of tilting
[3] Cross arm
[4] Rolling axis
[5]
Motor knob ring of rolling
[6] Vertical arm
[13] Handle
[12] Socket connector
[11] Function button
[9] Indicator light
[10] Joystick
[16] Thumb screw for fixing lens
[15] USB function interface
[14] 1/4 inch screw hole
[21] Charger
[20] USB cable（micro port）
[19] Thumb screw
[17] Adjusting clamping plate
[18] Adapter(Clamping plate)
[22] Batteries (Type: 18650)
[8] Panning axis
[7]
Motor knob ring of panning
[1] Tilting axis
1. Product Overview
MG Lite is one kind of 3-axis handheld gimbal especially for mirrorless cameras. Simple and clean design
integrated strong operation function, easy to switch among more using ways.
Panning / Tilting / Rolling 3-axis 360 degrees coverage, giving you ultimate experience while using the
MG Lite for shooting.
Portable
Installat i o n
Ext e n d e d
Installat i o n
* Default mode is handheld
* This product does not contain cameras
and camera equipment category
The showing camera is only for reference.
Optional Accessories
[16]
[20] [21] [22][19]
Portable handle
Package List
Product model
MG Lite gimbal
Handle
Adjusting clamping plate
Batteries (type: )18650
Charger
Quantity
1
1
1
1
3
1
1
4
User manual
1
Thumb screw
Thumb screw for fixing lens
Product model
Quantity
1
USB cable (micro port)
Warranty card
M4 screw
M22
U s e r M a n u a l
GuiLin FeiYu Technology Incorporated Company
3-Axis Gimbal for Mirrorless Camera
[16]
[18]
[17]
[13]
[3]
[6]
Rolling
360°
Tilting
360°
Panning 360°Panning 360°
[15]
[1]
[2]
[13]
[4]
[5]
[8]
[7]
[6]
[9]
[4]
[5]
[3]
[8]
[7]
[6]
[10]
[11]
[1]
[12]
[14]
[13]
[2]
A1
B1
A2
Camera
B2B2
5
Power on / off
Thumb
screw
Tilting
axis
( 1 ) Please mount the adjusting clamping plate, camera lens,memory card, etc. and then remove
the lens cover before the balance adjustment.
( 2 ) Simply loosen the Motor knob ring, the adapter or cross arm or vertical arm to move without
all wring out.
3. Balance
Adjustment
STEP 1
Balance adjustment
of the tilting axis
Mount the camera on the adjusting
clamping plate, fix the tilting, rolling
position, and keep it at the horizon
level, and turn the lens down.
Observe the camera status.
If the camera leans to front or back, then
loosen the motor knob ring(shown at
right), and adjust the camera to the
opposite position, until the camera can
mount properly
As shown, if the camera is tilted toward A1, the fixed
plate live A2 direction, if tilted toward B1, the
adapter should be live B2 direction.
As shown, if the camera is tilted toward A1, the camera live
A2 direction, if tilted toward B1, the camera should be live
B2 direction.
Be sure to tighten the Motor knob ring after the
adjustment (shown at right).
Adjust the center of gravity of the camera’s horizon
position in tilting axis, after the adjustment of the center of
gravity in vertical position.
The screws on the bottom of the adapter in a relaxed state.
Fix the tilting, rolling position, and keep it at the horizon level. Make
the camera lens forward. And observe the camera status.
If the camera leans to front or back, then move the camera to the
opposite position , until the camera can mount properly.
After the adjustment tighten the screws on the adapter
and the lens retaining ring.
（1） Adjust the center of gravity of the
camera’s vertical position in tilting axis
（2）
a.
b.
c.
a.
b.
c.
Thumb screw
The bottom
of adapter
Camera must close to the tiltingCamera must close to the tilting
2. Installation
Attention: Please complete the following instructions before power on the gimbal
18650 18650
3
4
Installation of the camera
Camera balance adjustment
2
Installation of adjusting clamping plate
Adjusting clamping plate light slip along the slideway to the suitable position.
If use a long lens, please install the thumb screw for fixing lens[16] after
installing the adjusting clamping plate.
Correctly place the camera to the adjusting
clamping plate, fixing it by the thumb screw[19]
trough the screw holes on the bottom of the
adjusting clamping plate. Adjust the adjusting
clamping plate to make the camera close to
the tilting motor, fixing the adjusting clamping
plate by the thumb screw [19]. If a long lens,
the long lens close to the thumb screw for
fixing lens [16].
In order to achieve the desired effect of
the gimbal, the first time to use or replace
the camera / lens, or change the camera
position, weight, size, appearance, please
adjust the balance.
Adjusting clamping plate
Thumb screw
for fixing lens
Adapter
1
Insert the batteries
Remove the handle, insert
2 pcs 18650 batteries and
tighten the screw.
Warm tip: If the first time to use or replace the
camera / lens, or change the camera position,
weight, size, appearance, it is only fixed,
without tightening the middle screw too tight,
in order to facilitate the balance after
adjustment.
Please refer to the "Balance Adjustment"
section.
Tilting axis
For long lens camera,
please install the camera
closely onto the thumb screw
For long lens camera,
please install the camera
closely onto the thumb screw
Power on： Long press Function Button and
release it until the green light is on.
Power off：Long press Function Botton and
release it until the green light changes from
quick flashing to constant.
If the battery power is too low, the red light
will flash 3 times every 5 seconds.
Please shut down the gimbal in time, and recharge
or replace the battery.
!
L
T
Cross armCross arm
Motor knob ringMotor knob ring
AdapterAdapter
A1
B1
Camera
Tips: Just need loose the
motor knob ring without all
wring out when adjustment
T=Tight L=Loose
A2A2
B2B2
!
As the stabilizer comes with boot
self-test function, such as the
stabilizer due to no load, the
balance adjustment is less than
ideal, or due to the intensity
adjustment does not fit and other
reasons cause the stabilizer
vibration is too large, the gimbal
will automatically enter the
Standby mode.
Attention
STEP 2
Balance adjustment of the rolling axis
Adjust the center of gravity of the camera’s horizon position in rolling axis, after the adjustment
of the center of gravity in tilting axis.
Fix rolling position manually and keep the camera at the horizon level, leave hold of it and observe the
camera status.
If the camera leans to left or rihgt, then loosen the motor knob ring (shown at bellow), and adjust the cross
arm to the opposite position of the cross arm, until the camera keep the current position after adjustment.
a.
b.
c.
Be sure to tighten the motor knob ring after the adjustment (shown at bellow）.
A1
B1
Cross armCross arm
B2B2
A2A2
Tips: Just need loose the
motor knob ring without all
wring out when adjustment
Tips: Just need loose the
motor knob ring without all
wring out when adjustment
4. Operation
STEP 3
Balance adjustment of the panning axis
Adjust balance of the panning after the balance adjustment of the tilting and rolling.
Keep the socket connector of the gimbal parallel to the
ground, refer the right picture:leave hold of it and
observe the camera status.
a.
b.
c.
Be sure to tighten the Motor knob ring after the adjustment (shown at bellow).
If the camera leaning left or right, loosen the Motor
knob ring (shown at bellow）, adjust the vertical arm
to leaning opposite direction,until the camera keep
the current position after adjustment.
Horizontal
Socket connector
Joystick Camera lens
Up
Down
Left
Up
Down
Left
RightRight
Explanation of joystick control
Realize other functions
Switch the working mode
Power on / off
Identify the current mode of the
gimbal by the indicator lights
Function Button
As shown, if the camera is tilted toward A1, the vertical arm
live A2 direction, if tilted toward B1, the vertical arm should
be live B2 direction.
A1A1
B1
Vertical armVertical arm
B2B2
A2A2
Indicator lightIndicator light
LED status Mode / Status
Blue light flashes once
Blue light flashes twice
Panning mode
Panning and Tilting mode
Lock mode / Initialize the gimbalBlue light constant on
Blue light keeps flashing Initialization failure / Malfunction
Blue light flashes for three times
Standby
Low battery （please charge or change the batteries）Red light flashes three times
Red light keeps flashing Entering standby / Entering power off
Explanation of LED indicator status
Reset the tilting axis of the gimbal to initial orientation and initial
mode
Operation
Double tap
Single tap
Function
Explanation
Panning mode / Lock mode
Panning and Tilting mode
Triple tap
Under panning and tilting mode, single tap to switch to lock mode
Rotate 180°in horizontal Make the camera lens rotate 180 °
Single tap to switch between panning mode and lock mode
Quadruple tap Reset
Single tap again to awake the gimbal, or triple tap to initialize the
gimbal
Long press
for 1 second
Standby
Long press
for 3 seconds
Power off
Operating Instructions of Function Button
Working Modes
Other Functions
Panning Mode
The camera can move to left or right smoothly along with the handheld moving.
The tilting and rolling directions fixed.
Panning and Tilting Mode
The camera can move to left or right and tilt up and down smoothly along with the handheld
moving. The rolling directions fixed.
Lock Mode
The camera stays in its current orientation. The panning, tilting and rolling direction are all fixed.
Reset
Reset the tilting axis of the gimbal to initial orientation and initial mode.
Standby
In standby model, keep the gimbal in power-up state, the motor stops working, the indicator
light flashes for three times, and single tap again to wake the gimbal.
As shown, if the camera is tilted toward A1, move the cross arm to A2 direction, if tilted toward B1,
move the cross arm to B2 direction.
STEP 4
Camera adaptation parameter adjustment
Joystick down
Decrease the
parameter
Increase the
parameter
Joystick up
（1）
（2）
（3）
（4）
After power on, You can adjust the adaptation parameter of the corresponding axis while operation the
function corresponding keys（as shown below）.the led will keep flashing in the adjust mode.
If the panning axis / rolling roll / tilting axis from side to side, then move up the joystick to increase the
adaptation parameter.
If the motor has felt the feeling of holding the handle, then move down the joystick to decrease the
adaptation parameter.
After the shock rocker disappeared please release button and click Save function parameters.
After finishing the stabilizer balance adjustment , turn on the gimbal for a testing, please refer to point 5
in "Installation" chapter.
If there is a slight vibration happen on the panning / rolling / tilting axis after power on the gimbal, it
means the adaptation parameters needs to be adjusted.
Steps:
Function Button Adjusted Axis
Tap button for five times
Tap button for six times
adjust for panning axis
adjust for rolling axis
Tap button for seven times adjust for tilting axis
6. Firmware Upgrade
18650
18650
Charger
USB Cable
Micro port
How to Charge
5. Gimbal Horizontal Angle Adjustment
The horizontal angle needs to be adjusted whenever the following situations happen to the gimbal:
（1） The tilt angle is not leveled with the horizontal surface.
（2） The roll angle is not parallel to the horizontal surface.
（3） Under lock mode, the panning angle drifts.
( Initialize the gimbal)
When the initialization failed, the LED indicator will flash quickly, repeat step (2) to reinitialize.
7. Parameters
887g (Not including the accessories of batteries,camera,camera lens and ect.)
Panning Increments 3°/s ~ 150°/s
Adaption
Weight
Sony NEX-5N/NEX-7 and other N-series, SONY A7RII / ILCE-7R / ILCE-5100, Panasonic LUMIX GH4,
Canon 5D Mark III (with standard lens), and other cameras with similar dimensions with weight less
1630g（The camera weight including the accessories of lens and ect.）
Usage Time 6 Hours
Tilting Increments 2°/s ~ 75°/s
Tilting / Rolling / Panning 360°
5V USB
Power Adapter
(Equipped by users)
Prohibit any user for any illegal purpose.
Users will be responsible for all behaviors of purchase and
use products.
The Company assumes no liability for any risks related to
or resulting from the debug and use of this product
(including the direct, indirect or third-party losses).
For any unknown sources of using, we will not be at any
services.
You can get the latest user manual from the official
website: www.feiyu-tech.com
Feiyu Tech reserves the right to amend this manual and
the terms and conditions of use the gimbal at any time.
ATTENTION
D I S C L A I M E R
Please correctly assemble the gimbal in accordance with the diagram.
Please install the camera, complete the installation and balance
adjustment before power on the gimbal.
Please charge the battery with the standard charger.
When the gimbal is not in use or placed on the table, please ensure
it is powered off.
Please visit the official website of Feiyu Tech
to get related information: www.feiyu-tech.com
Support email: service@feiyu-tech.com
Connect the Micro-USB port of the USB cable with the charger,
and the USB port with 5V USB power adapter.
（1）
（2）
In boot-up state, long press the Function Botton until the red light flashes quickly to enter standby
status, the blue light will flash 3 times periodically.
Lay the gimbal on a static flat surface and triple tap the Function Botton. Initialization is successful
when the blue light changes from constant on to flashing 3 times periodically.
USB Cable
micro port
Function
Interface
Function
Interface
PC
Upgrade........
Upgrade steps
(1)
Connect the USB cable with micro port as the above picture.
(2)
(3)
Please visit the official website www.feiyu-tech.com to download the relevant programs for
upgrading, including USB drive program, firmware upgrade software and product firmware,
and install the relevant software, decompress the firmware files for standby application.
Please upgrade the relevant firmware according to the operation instructions of firmware
upgrade software.
Adjusting steps:
2 0 1 6 . 1 1
V 1.46
Joystick
down
Joystick up
Termékspecifikációk
| Márka: | FeiyuTech |
| Kategória: | nincs kategorizálva |
| Modell: | MG Lite |
Szüksége van segítségre?
Ha segítségre van szüksége FeiyuTech MG Lite, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva FeiyuTech
27 December 2024
27 December 2024
27 December 2024
27 December 2024
30 Augusztus 2024
30 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Cubot
- nincs kategorizálva Fluval
- nincs kategorizálva Toolit
- nincs kategorizálva Radiant
- nincs kategorizálva Ninja
- nincs kategorizálva Air Guard
- nincs kategorizálva Wago
- nincs kategorizálva Seenergy
- nincs kategorizálva Nanni
- nincs kategorizálva Lofrans
- nincs kategorizálva Sunbeam
- nincs kategorizálva BBQ Premium
- nincs kategorizálva Uniden
- nincs kategorizálva Mesa Boogie
- nincs kategorizálva Eligent
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025