Használati útmutató Fellowes MobilePro Series 8201901

Fellowes billentyűzet MobilePro Series 8201901

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fellowes MobilePro Series 8201901 (40 oldal) a billentyűzet kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/40
PLEASE READ INSTRUCTIONS BEFORE USE.
DO NOT DISCARD.
LIRE LES INSTRUCTIONS AVANT UTILISATION.
NE PAS JETER.
LEA LAS INSTRUCCIONES ANTES DEL USO.
NO TIRAR.
BITTE LESEN SIE DIE ANLEITUNGEN SORGFÄLTIG DURCH,
BEVOR SIE DAS GERÄT BENUTZEN.
BITTE GUT AUFBEWAHREN.
LEGGERE LE ISTRUZIONI PRIMA DELL’USO.
NON GETTARE.
LEES VÓÓR GEBRUIK DE INSTRUCTIES DOOR.
NIET WEGGOOIEN.
LÄS DESSA INSTRUKTIONER FÖRE ANVÄNDNING.
KASSERA EJ.
PRZED UŻYCIEM PROSZĘ PRZECZY TAĆ NINIEJSZĄ INSTRUKCJĘ.
NIE WYRZUCAĆ.
ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПРОСЬБА ОЗНАКОМИТЬСЯ С ИНСТРУКЦИЯМИ.
НЕ ВЫБРАСЫВАТЬ.
LEIA AS INSTRUÇÕES ANTES DA UTILIZAÇÃO.
NÃO AS DEITE FORA.
MobilePro Series™
Bluetooth® Keyboard with Carrying Case
Clavier Bluetooth® avec étui de transport
Teclado Bluetooth®
con funda de transporte
Bluetooth® Tastatur mit Tragetasche
Tastiera Bluetooth® con borsa da trasporto
Bluetooth®-toetsenbord met draagkoffer
Bluetooth®-tangentbord med väska
Klawiatura Bluetooth® z etui
Клавиатура Bluetooth® с футляром для переноски
Teclado Bluetooth® com mala de transporte
2
CONTENTS
Bluetooth® Keyboard, Charging Cable and Carrying Case with Wrist Support.
USER MANUAL
Thank you for choosing Fellowes. For optimum performance, please read this instruction guide carefully before
operation. Keep for reference.
APPEARANCE
GETTING STARTED
1. BUTTONS
On/Off Slider Switch: Slide switch ON or OFF to turn the device ON or OFF
Connect Button: After the On/Off Slider Switch is in the ON position, press the Connect Button.
The keyboard is now ready to connect to your device.
2. STATUS LIGHTS
Caps Lock Light: Light will glow blue when Caps Lock is activated.
Bluetooth® Status Light: Press the Connect Button. The Bluetooth® Status Light will blink blue until the
keyboard connects with your device. After connecting with your device the blue light will turn off.
Charging Light: Light will glow red while the keyboard is charging. When the keyboard is fully charged the
light will turn off.
Power Light: Slide the On/Off Slider Switch to ON. The blue status light will illuminate for four seconds
and turn off to save power. Your keyboard is still on.
Charge PowerCAPS
Connect OFF/ON
Power Light
Charging Light
Bluetooth® Status Light
1
3
5
On/Off Slider
Connect Button
Caps Lock Light
2
4
6
Charge PowerCAPS
Connect OFF/ON
Esc/HomeESC Key
Virtual Keyboard
Select All
Copy
Paste
Cut
Change Language
Back
Play/Pause
Next
Mute
Volume Down
Volume Up
Lock/DeleteDelete
*Press and hold down “FN” key and other funcon key simultaneously
Show Keyboard
Select All
Copy
Paste
Cut
Change Language
Play Previous Track
Play/Pause
Play Next Track
Mute
Volume Down
Volume Up
Lock/Delete*
Show Keyboard
Select All
Copy
Paste
Cut
Change Language
Play Previous Track
Play/Pause
Play Next Track
Mute
Volume Down
Volume Up
Lock
No Funconality
Select All*
Copy*
Paste*
Cut*
No Funconality
Play Previous Track*
Play/Pause*
Play Next Track*
Mute*
Volume Down*
Volume Up*
Delete
Key Funcon Key Icon Funconality on iOS Funconality on Android Funconality on Windows
F n
Home Home Opens Browser Window*
ENGLISH
3
PAIRING INSTRUCTIONS
PAIRING WITH iOS ®
Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and
then turn off to save power. Your keyboard is still on.
Step 2: On the iOS device, select: Settings – General – Bluetooth® – On.
Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will be blinking blue).
Step 4: The iOS device will display “Fellowes keyboard” as an available device.
Step 5: Select “Fellowes keyboard” on the iOS device. The iOS device will display a code.
Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the iOS device.
Step 7: Switch the keyboard to iOS mode by holding the “Fn” key down and hitting the “Q” key.
SPECIFICATION
1. Working voltage: 3.0-4.2 V
2. Working current: < 2.5 mA
3. Standby current: < 0.3 mA
4. Charging current: > 100 mA
5. Operating temperature: -10 to 55 C°
6. Operating distance: Up to 10 meters
7. Charging time: < 4 hours
8. Lithium battery capacity: 280 mA
9. Battery working time: 90 hours
10. Battery life: 3 years
11. Battery size: 3.8 x 20 x 35mm
12. Keystroke life: 3 million strokes
13. Standby time: 90 days
PAIRING WITH ANDROID™
Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and
then turn off to save power. Your keyboard is still on.
Step 2: On the device, select Settings -> Bluetooth® -> Turn Bluetooth® on, and select “scan for devices”.
Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will blink blue).
Step 4: The Android device will display “Fellowes keyboard” as an available device.
Step 5: Select “Fellowes keyboard” on the Android device. The Android device will display a code.
Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the Android device.
Step 7: Switch the keyboard to Android mode by holding the “Fn” key down and hitting the “W” key.
PAIRING WITH WINDOWS®
Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and
then turn off to save power. Your keyboard is still on.
Step 2: On the device, go to Settings -> PC + Devices -> Bluetooth® -> Turn Bluetooth® on, and select
“search for a device”.
Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will blink blue).
Step 4: The Windows device will display “Fellowes keyboard” as an available device.
Step 5: Select “Fellowes keyboard” on the Windows device. The Windows device will display a code.
Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the Windows device.
Step 7: Switch the keyboard to Windows mode by holding the “Fn” key down and hitting the “E” key.
1. Plug the Micro-USB charging cable into the keyboard.
2. Plug the USB port into a computer or power adapter, if you have one - not included.
3. Charge for 4 hours or until the charge indicator light turns off.
Charge PowerCAPS
Connect OFF/ON
CHARGING INSTRUCTIONS
Glowing Red Battery needs charging/charging in progress
Turns Off Battery is fully charged
Charge
POWER SAVE MODE
The keyboard will enter sleep mode after being idle for 15 minutes. To activate it from sleep mode, press any
key and wait 3 seconds.

Termékspecifikációk

Márka: Fellowes
Kategória: billentyűzet
Modell: MobilePro Series 8201901

Szüksége van segítségre?

Ha segítségre van szüksége Fellowes MobilePro Series 8201901, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók billentyűzet Fellowes

Fellowes

Fellowes MobilePro Series Útmutató

29 Augusztus 2024
Fellowes

Fellowes MobilePro Series 8201901 Útmutató

25 Július 2024

Útmutatók billentyűzet

Legújabb útmutatók billentyűzet

Tiptop Audio

Tiptop Audio Z-PASSIVE Útmutató

5 Április 2025
Tiptop Audio

Tiptop Audio MODEL 258T Útmutató

5 Április 2025
Tiptop Audio

Tiptop Audio Happy Ending Kit Útmutató

5 Április 2025
Tiptop Audio

Tiptop Audio SD808 Útmutató

5 Április 2025
Tiptop Audio

Tiptop Audio QART-QNTZ Útmutató

5 Április 2025
Gembird

Gembird KBS-P7-W-DE Útmutató

4 Április 2025
Trust

Trust Callaz GXT 834 Útmutató

30 Március 2025
Krom

Krom Kunai Útmutató

30 Március 2025
Savio

Savio Blackout X2 Útmutató

30 Március 2025
Evga

Evga Z10 Útmutató

30 Március 2025