Használati útmutató Ferm FRS-600

Ferm Fűrészgép FRS-600

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ferm FRS-600 (6 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
Ferm B.V. • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0210/23
Ferm Recipro Saw
FRS-600
USER’S MANUAL
Art.nr. 726600
Screwfix art.nr 19394
UK Subject to change
Document Ref:
FRS-600/19394/PMR8/Issue 1/Mar 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm 11
EXPLODED VIEW
FERM FRS-600 RECIPRO SAW
USERS MANUAL
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
1 Blade
2. F oot- Plate
3. Blade Clamp Screw
4. Trigger Switch
5. Speed Controller
6. Trigger lock Button
7. Mains Lead
8, Footplate length adjustment screws
9. 3 mm H exago n Key (n ot s hown)
10. 4mm Hexagon Key (not shown)
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality stan-
dards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear suitable gloves and
apron to protect against sparks/debris. Wear earplugs
or ear defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
1 2 5
67
43
8
Voltage | 230 V
Frequency | 50 Hz
Power input | 600 Watts
No load speed | 300-2000 rpm
Maximum cutting thickness | 115 mm
Stroke length | 30 mm
Weight | 3,3 kg
Lpa (sound pressure level) | 86 dB(A)
Lwa (sound pressure capacity) | 99 dB(A)
Vibration value | 8,9 m/s2
2 Ferm
10 Ferm
OPERATIONAL SAFETY
Warning! Never use the machine for sawing asbe-
stos. If asbestos is discovered or suspected, contact
your local council for advice.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap-
ours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (resi-
dual current device) to provide protection against elec-
trical shock. Prevent body contact with grounded sur-
faces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Do not abuse cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.
Secure Work
Use clamps or a vice to hold work. It is safer than using
your hand and it frees both hands to operate the tool. Be
aware that this saw is a powerful machine; you must use
two hands to control it.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters. Always
switch off and unplug the saw from the power
supply before making adjustments or changing
blades.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before swit-
ching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.
Extension cables
Use only three core earthed extension cables suitable
for the power input of the tool (minimum cable size
1.5mm2). Plug into an earthed socket only.
When using a cable reel unwind it fully. Do not use long
extension cables.
Outdoors use
If the tool is suitable to be used outdoors, only use an
extension cable intended for outdoor use and marked
accordingly. Use a RCD (residual current device) to pro-
vide protection against electrical shock. Do not use in
rain or damp conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust of fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of any other accessory or attachment other than
recommended in the instructions or catalogue may pre-
sent a risk of personal injury. Use extension cables suita-
ble for the power input of the saw (minimum cable size
1.5mm2). When using a cable reel unwind the cable fully.
Ferm 3
SPARE PARTS
REF.NR. DESCRIPTION FERM NR.
001 ADJUSTABLE BOTTOM PLATE 408500
002 GUARD PLATE 408501
003 RUBBER SLEEVE 408502
007 BLADE HOLDER 408503
014 RECIPROCALING BAR 408504
015 SLIDING BEARING 408505
019 ADJUSTING SPEED PLATE 408506
021 LARGE COVER SHEET 408507
024 ROLLER BEARING 408508
027 ROLLER SHAFT 408509
028 GEAR WHEEL 408510
029 WASHER 408511
030 CENTRE COLUMN 408512
032 CARBON BRUSH SET 408513
033 CARBON BRUSH HOLDER 408514
037 SWITCH 408515
052 ROTOR 408516
057 STATOR 408517

Termékspecifikációk

Márka: Ferm
Kategória: Fűrészgép
Modell: FRS-600

Szüksége van segítségre?

Ha segítségre van szüksége Ferm FRS-600, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Ferm

Ferm

Ferm FKS-165 Útmutató

14 Október 2024
Ferm

Ferm FKS-180 Útmutató

2 Szeptember 2024
Ferm

Ferm TSM1033 Útmutató

14 Augusztus 2024
Ferm

Ferm CSM1042P Útmutató

11 Augusztus 2024
Ferm

Ferm RSM1015 Útmutató

3 Augusztus 2024
Ferm

Ferm CSM1034 Útmutató

3 Augusztus 2024
Ferm

Ferm FKS-210L Útmutató

31 Július 2024
Ferm

Ferm FZT-315 Útmutató

31 Július 2024
Ferm

Ferm RSM1007 Útmutató

28 Július 2024
Ferm

Ferm TCM1010 Útmutató

28 Július 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025
Makita

Makita DCS4610 Útmutató

2 Április 2025
Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025