Használati útmutató FiiO Q3

FiiO Vevő Q3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót FiiO Q3 (7 oldal) a Vevő kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/7
快速入门指
Quick Start Guide
型号:Q3
Model: Q3
English DAC and Headphone Amplifier
Buttons and Ports
3.5mm headphone output/Line in Bass switch
2.5mm balanced headphone output Gain/Filter/Reset button/Green
indicator light
4.4mm balanced headphone output USB Type C port
④ ⑨RGB indicator light Charging switch
Power/Volume knob
Operation Instructions
1 Turn on/off
Turn the Power/Volume knob clockwise until a click sound is heard to turn on
the device; keep turning clockwise to increase the volume.
Turn anticlockwise to decrease the volume; turn anticlockwise until a click
sound is heard to turn off the device.
2 Gain/Filter/Reset button/Green indicator light
1) Single press button : switch gains. The OFF green light means Low Gain,
ON means High Gain.
2) Double press button: switch filters.
3) Hold buttonwhile connecting to a computer: enter UAC1.0 mode. (Please
hold it less than 10 seconds, otherwise the device will be reset.)
4) Hold buttonfor 15s: reset the device. Hold the buttonuntil the RGB
indicator light turns off to complete the reset operation.
3 RGB indicator light
It is off if the device is off or under standby state. When the device is on but not
charging, it will be constantly on. Different colors stand for different states.
Here are the explanations.
1) Powered on but not working: blue light
2) USB DAC mode
PCM≤48KHz: blue light
PCM48KHz: yellow light
DSD: green light
3) Line in (headphone amp mode): blue light
4) Low battery prompt: red light flashes twice every 5 seconds
5) Charging (powered off): red light pulses; constantly on while it is fully

Termékspecifikációk

Márka: FiiO
Kategória: Vevő
Modell: Q3

Szüksége van segítségre?

Ha segítségre van szüksége FiiO Q3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek