Használati útmutató Fluke i2000 Flex

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke i2000 Flex (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.8 csillagra

i3000s/i2000 Flex

AC Current Probe

Instructions

Introduction

The i3000s 24 Flex, i3000s 36 Flex, and i2000 Flex AC Current Probes

(the Probe) are used with oscilloscopes, digital multimeters, recorders

or data loggers. The i3000s probes can be used to measure AC current

up to 3000 A. The i2000 can be used to measure AC current up to

2000A. The flexible measuring head allows current measurements on

conductors that are hard to reach or inaccessible using typical clamp-

on current probes.

The Probes provide a low-voltage (3 V ac for i3000s models, and 2 Vac

for i2000) output that is proportional to the current being measured.

The Probes provide full-scale direct readings for 30A, 300 A, and

3000A when using the i3000s models, and 20 A, 200A, and 2000A

when using the i2000.

Safety Information

A Warning identifies hazardous conditions and procedures that are

dangerous to the user. A Caution identifies conditions and procedures

that can cause damage to the Product or the equipment under test.

XW Warning

To prevent possible electrical shock, fire, or personal injury:

Read all safety information before you use the Product.

Carefully read all instructions.

Do not alter the Product and use only as specified, or the

protection supplied by the Product can be compromised.

Do not use the Product if it operates incorrectly.

Do not use the Product if it is altered or damaged.

PN 2560447 (English)

March 2006 Rev. 3, 02/22

©2021-2022 Fluke Corporation. All rights reserved. Specifications are

subject to change without notice. All Product names are trademarks of their

respective companies.

Termékspecifikációk