Használati útmutató Furuno LA11

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Furuno LA11 (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
H Y D R A U L I C L I N E A R A C T U A T O R
LA11
TABLE OF CONTENTS
1. GENERAL INFORMATION ............................................... p. 01
2. TECHNICAL SPECIFICATIONS and APPLICATION ........ p. 02
3. DESCRIPTION ................................................................. p. 03
3.1 General
3.2 Pump Unit ( )HRP11
3.3 Reservoir/Bypass Assembly
3.4 Steering Cylinder
4. INSTALLATION ................................................................. p. 05
4.1 Mechanical
4.2 Hydraulic
4.3 Electrical
5. NOTES ............................................................................. p. 07
6. DRAWINGS ..................................................................... p. 08
6.1 — Assembly Schematic LA11
6.2 — System Connection SchematicLA11
i
1. GENERAL INFORMATION
The Accu-Steer LA11 unit is a hydraulic linear actuator designed
to interface an autopilot system with a mechanical steering sys-
tems such as wire, cable or chain drives. A hydraulic linear ac-
tuator consists of a hydraulic drive unit (containing a pump unit,
bypass valve and reservoir assembly), a steering cylinder and the
interconnecting hoses.
One end of the cylinder is xed and the other end is connected to
a tiller arm or the mechanical quadrant, which is connected to a
rudder shaft. With this connection to a tiller arm the linear move-
ment of the cylinder is changed to rotary movement, which turns
the rudder and steers the vessel.
During normal mechanical steering, the hydraulic steering cylinder
strokes to port and starboard as the vessel is steered manually.
The oil in both sides of the cylinder ows back and forth through
a normally open bypass valve located in the linear actuator drive
unit. The steering cylinder is connected to the drive assembly with
two hoses (port and starboard). When the autopilot is switched into
the operating mode, the bypass valve is electrically closed. The
autopilot then drives the reversing hydraulic pump which in turn
operates the steering cylinder. See section 3 of this manual for a
more in depth description.
When the autopilot is operating, the cylinder with be turning the
rudder. The mechanical steering will be back-driven during this
time. The vessels steering wheel will be turning as the autopilot
makes corrections.
The Accu-Steer HRP11 11 is the reversing pump unit used in the LA
linear actuator. The output ow rate of the pumpset determines the
speed of the steering cylinder. The pump outputs 1.0 cu HRP11
in/sec or 16.4 cc/sec.
The BA150 X 9 is a balanced steering cylinder, which means the
volume of oil on both sides of the cylinder is equal. The volume of
this steering cylinder is 13 cu in (215 cc) of oil.
p01

Termékspecifikációk

Márka: Furuno
Kategória: nincs kategorizálva
Modell: LA11

Szüksége van segítségre?

Ha segítségre van szüksége Furuno LA11, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Furuno

Furuno

Furuno 1751 Mark-2 Útmutató

19 Augusztus 2024
Furuno

Furuno GP-1650WDF Útmutató

18 Augusztus 2024
Furuno

Furuno GP-33 Útmutató

13 Augusztus 2024
Furuno

Furuno 1761 Mark-2 Útmutató

13 Augusztus 2024
Furuno

Furuno DRS2D Útmutató

12 Augusztus 2024
Furuno

Furuno TZTL15F Útmutató

12 Augusztus 2024
Furuno

Furuno Verado Útmutató

12 Augusztus 2024
Furuno

Furuno GP-330B Útmutató

12 Augusztus 2024
Furuno

Furuno 1761 Mark-3 Útmutató

11 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025