Használati útmutató Furuno NAVpilot-711

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Furuno NAVpilot-711 (100 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 22 ember találta hasznosnak.

AUTOPILOT

NAVpilot-700/711/720

Installation Manual

SYSTEM CONFIGURATION.........................ii

EQUIPMENT LISTS......................................iii

1.HOW TO INSTALL THE UNITS............1-1

1.1Control Unit FAP-7001/FAP-7011......1-1

1.1.1Surface mount..........................1-2

1.1.2Desktop mount.........................1-4

1.2Processor Unit FAP-7002..................1-5

1.3Rudder Reference Unit FAP-6112.....1-7

1.4Remote Controllers (option)...............1-9

1.5Distributor FAP-6800 (option)..........1-12

1.6Control Unit FAP-7021.....................1-13

1.7Cable Extension Kit

FAP-7822 (option)............................1-13

2.WIRING..................................................2-1

2.1General Wiring...................................2-1

2.2Processor Unit....................................2-2

2.2.1Connections inside the processor

unit...........................................2-2

2.2.2How to fasten cables to the cable .

clamps......................................2-3

2.2.3How to put wires into the connector

blocks.......................................2-4

2.2.4How to terminate of NMEA2000

connection................................2-5

2.2.5Power and motor cables..........2-5

2.2.6Teleflex linear sensor...............2-7

2.2.7CAN bus power........................2-8

2.2.8Connection to TB4...................2-8

2.3Control Unit........................................2-8

2.4Remote Controllers (option)...............2-9

2.4.1Example remote controller

connections............................2-10

2.4.2Prohibited remote controller

connections............................2-11

2.5Input/Output Sentences...................2-12

3.INITIAL SETTINGS...............................3-1

3.1About Initial Settings, Menu Operation3-1

3.2How to Select Language and Units,

Open the Installation Menu................3-2

3.3Display Setup.....................................3-4

3.4Ship’s Characteristics Menu...............3-5

3.5Dockside Setup Menu........................3-6

Dockside setup for RRU.....................3-6

Dockside setup for Fantum

Feedback

TM

.....................................3-15

3.6CAN bus Port Setup.........................3-17

3.7NMEA0183 Port Setup.....................3-18

3.8Sensor Setup....................................3-20

3.9Universal Port Setup........................3-21

3.10Sea Trial...........................................3-23

3.11Data Calibration................................3-25

3.12PARAMETER SETUP Menu ...........3-26

3.13AUTO OPTION Menu.......................3-30

3.14NAV OPTION Menu.........................3-31

3.15FISH HUNTER OPTION Menu or

WIND OPTION Menu.......................3-34

3.15.1FISH HUNTER OPTION

menu......................................3-34

3.15.2WIND OPTION menu.............3-35

3.16SYSTEM SETUP Menu....................3-36

3.17RC (Remote Controller) SETUP

Menu................................................3-37

3.18All Clear............................................3-37

JIS CABLE GUIDE.................................AP-1

PACKING LISTS........................................A-1

OUTLINE DRAWINGS...............................D-1

INTERCONNECTION DIAGRAM...............S-1

MOUNTING TEMPLATES

www.furuno.com

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Termékspecifikációk