Használati útmutató Garmin GPS 24xd NMEA 2000
Oldalak 36 Angol nincs kategorizálva
Olvassa el ingyen online a(z) Garmin GPS 24xd NMEA 2000 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 15 alkalommal tekintették meg. Kérdése van a modellről? Tegyen fel kérdést
GPS 24XD NMEA 2000®
INSTALLATION INSTRUCTIONS
Important Safety Information
Important Safety Information
Important Safety Information
Important Safety InformationImportant Safety Information
CAUTION
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
For the best performance and to avoid damage to your boat, read all installation instructions before
proceeding. Install the device per these instructions. Use the appropriate fasteners, tools, and mounts listed,
which are available at most marine dealers.
The Garmin® GPS 24xd NMEA 2000 high-sensitivity GPS antenna provides position information to your existing
NMEA 2000 network. If your boat does not have a NMEA 2000 network, you will need to install one.
For more information, go to .garmin.com
Tools Needed
Tools Needed
Tools Needed
Tools NeededTools Needed
• Drill
•3.2 mm (1/8 in.) drill bit
•19 mm (3/4 in.) drill bit for a pole-mount cable-hole
•25 mm (1 in.) hole saw for a surface-mount cable-hole
•Countersink bit for mounting on fiberglass
•Screws for under-deck mounting
•Screwdriver, appropriate for the screw type
•Marine sealant (optional)
•Additional NMEA 2000 network components as needed
TA-2020/6796
GUID-28CE8C25-CFD8-4C12-B6D0-AD9CDF4D5084 v3June 2021
Termékspecifikációk
| Márka: | Garmin |
| Kategória: | nincs kategorizálva |
| Modell: | GPS 24xd NMEA 2000 |
Szüksége van segítségre?
Ha segítségre van szüksége Garmin GPS 24xd NMEA 2000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek