Használati útmutató GE JVX5365SJSS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GE JVX5365SJSS (4 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 29 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.9 csillagra

Installation

Instructions

BEFORE YOU BEGIN

Read these instructions carefully and completely.

• IMPORTANT—Save these instructions

for local inspector’s use.

• IMPORTANT—Observe all governing

codes and ordinances.

• Note to Installer – Be sure to leave these

instructions with the consumer.

• Note to Consumer – Keep these instructions for

future reference.

• Proper installation is the responsibility of the installer

• Product failure due to improper installation is not

covered under the Warranty.

Range Hood Connection to

Wall Switch

JVX3240, JVX3300, JVX5305 and JVX5365

TOOLS NEEDED

If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737).

31-11120-1 09-17 GEA

1/4” Nutdriver

Flat blade and Phillips

Head Screwdrivers

FOR YOUR SAFETY

WARNING Before beginning the installation,

switch power o at service panel and lock the

service disconnecting means to prevent power from

being switched on accidentally. When the service

disconnecting means cannot be locked, securely

fasten a prominent warning device, such as a tag, to

the service panel.

WARNING TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK OR

INJURY TO PERSONS, OBSERVE THE

FOLLOWING:

A Installation work and electrical wiring must be

done by qualied person(s) in accordance with

all applicable codes and standards, including

re-rated construction.

B When cutting or drilling into wall or ceiling, do not

damage electrical wiring and other hidden utilities.

POWER SUPPLY

IMPORTANT – (Please read carefully)

WARNING FOR PERSONAL SAFETY, THIS

APPLIANCE MUST BE PROPERLY GROUNDED.

Remove house fuse or open circuit breaker before

beginning installation.

Do not use an extension cord or adapter plug with

this appliance. Follow National Electrical Codes or

prevailing local codes and ordinances.

Electrical supply

These vent hoods must be supplied with 120V, 60Hz,

and connected to an individual, properly grounded

branch circuit, and protected by a 15 or 20 amp circuit

breaker or time delay fuse.

• Wiring must be 2 wire with ground.

• If the electrical supply does not meet the above

requirements, call a licensed electrician before

proceeding.

• Route house wiring as close to the installation

location as possible in the ceiling or wall.

• Connect the wiring to the house wiring in

accordance with local codes.

Grounding instructions

The grounding conductor must be connected to

a ground metal, permanent wiring system, or an

equipment-grounding terminal or lead on the hood.

WARNING The improper connection of the

equipment-grounding conductor can result in a risk

of electric shock. Check with a qualified electrician

or service representative if you are in doubt whether

the appliance is properly grounded.

Wire cutter/stripper

Termékspecifikációk