Használati útmutató GE JX2130WH

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GE JX2130WH (4 oldal) a Magnetron kategóriában. Ezt az útmutatót 14 ember találta hasznosnak.

PART QUANTITY

Trim Frame1

Bottom Duct1

Top Bracket1

Phillips Round-Head24

Screws (22 required

for installation)

Phillips Flat-Head 5

Screws (4 required for

installation)

Anti-Tip Bracket 1

Bottom Bracket 1

Template 1

PARTS INCLUDED

Questions? Call GE Answer Center at 800.626.2000 or Visit our Website at:www.GEAppliances.com

READ CAREFULLY.

KEEP THESE INSTRUCTIONS.

Installation Built-In Trim Kits

Instructions JX2127 and JX2130

Read these instructions completely and carefully.

•IMPORTANT –Save these

instructions for local inspector’s use.

•IMPORTANT –Observe all

governing codes and ordinances.

•Note to Installer –Be sure to leave these

instructions with the Consumer.

•Note to Consumer –Keep these instructions

for future reference.

• For easier installation and personal safety, we

recommend that two people install this microwave oven.

• Unplug the microwave oven before attempting

installation of this kit.

BEFORE YOU BEGIN

• Skill level–Installation of this appliance requires basic

mechanical and electrical skills.

• Completion time – 1-3 hours

• Proper installation is the responsibility of the installer.

• Product failure due to improper installation is not

covered under the Warranty.

• This kit is UL listed for installation alone or over

any General Electric/Hotpoint/RCA single electric

wall oven.

TOOLS YOU WILL NEED

#2 Phillips screwdriver

Pencil

Tape measure

Awl or punch

Drill with 7⁄64″bit or #35

1

FOR YOUR SAFETY:

WARNING– Before beginning the

installation, switch power off at service panel and lock

the service disconnecting means to prevent power

from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten

a prominent warning device, such as a tag, to the

service panel.

Scissors (optional)

Termékspecifikációk