Használati útmutató Geemarc AMPLICALL PSA200
Geemarc
nincs kategorizálva
AMPLICALL PSA200
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Geemarc AMPLICALL PSA200 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/2
Transmitter
1. Loudspeaker
2. Battery cover
3. Power slide switch
(Alert/o/arm)
4. Pressure sensor mat
1
2
3 4
5
8
9
7
6
Pressure sensor mat and alarm
DESCRIPTION
INSTALLATION
Inside your gift box you should nd the below elements:
- 1 user guide
- 1 pressure sensor mat and its transmitter
- 1 wireless receiver
- Batteries are not included.
- A mains adapter is available as a spare part (6V 0.3A)..
(Fig1) (Fig 2)
(Fig3)
(Fig 4)
(Fig 5)
FEATURES
AMPLICALL PSA 200
Box Content
Wireless receiver
1. Volume control (HI/LO)
2,4. Visual indicators (Flash when
triggered by transmitter)
3. Visual indicator (Flashes when
triggered by transmitter/ Lights up
when batteries are low)
5. Loudspeaker
8. “Learn” paring button
9. Battery cover
10. Screw
11. Holes to mount device onto a wall
6. Power slide switch (Alarm/
o/chime)
7. DC adaptor socket (6V
DC/0.3A)
Setting up the transmitter and placing
the pressure sensor mat.
Setting up the receiver
1. Slide open the transmitter’s battery compartment
and place a 9V battery type PP3 (not included) while
observing the correct polarity before replacing the
battery cover. (Fig1)
2. Connect the transmitter’s wire to that of the
pressure sensor pad. (Fig2)
3. Place the pressure sensor mat under the cushion
of the wheelchair of the person you are caring for.
(Fig3)
Note: The transmitter
can be installed
onto a wall. To
do so the bellow
instructions should
be followed.
4. Drill two holes horizontally, 44 mm apart.
5. Insert two wall plugs xing into the two holes.
6. Screw two screws into the plugs, hang the
transmitter on the support and slide it down to lock it.
1. Unscrew the screw that is on the back of the wireless
receiver and that holds the cover of the battery
compartment in place before sliding open the battery
compartment. (Fig4)
2. Place three 1.5V batteries ( type LR14 ) in the battery
compartment while observing the correct polarity, and
place the battery compartment back in place. (Fig5)
3. You can connect an AC adapter 6V DC 0.3A (not
included); plug length: 12mm; inside positive ID: 2.1mm;
outside negative OD: 5.5mm) to the alert, and install the
batteries as backup in case of power failure.
Note: The receiver is wall mountable.
A. Drill two holes horizontally, 36 mm apart.
B. Insert two wall plugs xing into the two holes.
C. Screw two screws into the plugs, hang the receiver on the
support and slide it down to lock it.
The Amplicall PSA200 consist of a battery powered pressure
sensor mat connected to a signal transmitter, and a wireless
signal receiver.
As soon as pressure stops being applied to the sensor mat, the
transmitter it is connected to will send a signal to the wireless
receiver which will immediately start ringing and ashing. The
receiver’s alarm volume can be set to high or low. The distance
between the transmitter and the receiver should not exceed 30
meters in open eld.
The pressure sensor mat, which is powered by a 9V battery
(not included) was designed to be placed on the wheelchair or
mattress of a person with reduced mobility. The alarm it needs to
be paired with, which can work either with batteries (not included)
or plugged into the mains (adaptor not included), alerts the
caregiver whenever the person p1-he or she cared for appears to no
longer be sitting or lying on the pressure sensor mat.
Extremely easy to use our product is suitable for households that
count a member with reduced mobility, nursing homes, hospitals
and other places where patients or residents are being cared for.
Distance in between cannot exceed 30 meters.
EVERYDAY USE
You need to sit on the pressure sensor mat before turning on the
transmitter, otherwise the alarm will start ringing.
When sitting on the pressure sensor mat, move the power slide
switch of the transmitter to the “ALERT” position. The transmitter will
sound 4 seconds later to indicate it is now working. As soon as the
transmitter detects that no pressure is being applied to the sensor
mat, it will send a signal to the wireless receiver to trigger its alarm
and ashing light. It will keep sending a signal every 40 seconds
until pressure is once again applied on the sensor mat.
When the power slide switch of the receiver is placed on the
“CHIME” position, the receiver will ring and ash for 5 seconds
every 30 seconds each time it receives a signal from the transmitter
alerting it that no pressure is being applied on the sensor mat. The
receiver will keep ringing until it is turned o or pressure is once
again applied on the sensor mat.
When the power slide switch of the receiver is placed on
the “ALARM” position, the receiver will ring and ash for 30
seconds every 10 seconds each time it receives a signal
from the transmitter alerting it that no pressure is being
applied on the sensor mat. The receiver will keep ringing
until it is turned o or pressure is once again applied on the
sensor mat.
Note: when not used, the power switch of both the
receiver and transmitter should be moved to the “OFF”
position to prevent them from ringing and save battery
life.
OFF
CHIME
ALARM
ALERT ARM
+
OFF
CHIME
ALARM
ALERT ARM
+
PAIRING
The pressure sensor mat and wireless receiver are
delivered already paired. When setting them up for the
rst time, you should apply pressure on the sensor mat
to make sure this triggers the alarm, which ought to be
placed less than 30 meters away.
Material :
Plastic PVC
10
11
UGEnACPSA200
En
1
3
2
ALERT ARM
4
The middle LED (3) will start ashing to warn you that
the battery needs to be replaced.
Termékspecifikációk
| Márka: | Geemarc |
| Kategória: | nincs kategorizálva |
| Modell: | AMPLICALL PSA200 |
Szüksége van segítségre?
Ha segítségre van szüksége Geemarc AMPLICALL PSA200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Geemarc
11 December 2024
11 December 2024
11 December 2024
11 December 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
30 Augusztus 2024
16 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Livington
- nincs kategorizálva Inverx
- nincs kategorizálva Cleco
- nincs kategorizálva Thorens
- nincs kategorizálva Electro Harmonix
- nincs kategorizálva Matterport
- nincs kategorizálva Amfra
- nincs kategorizálva Tescoma
- nincs kategorizálva Golden Age Project
- nincs kategorizálva Master
- nincs kategorizálva Dnt
- nincs kategorizálva Auray
- nincs kategorizálva Somfy
- nincs kategorizálva Sime
- nincs kategorizálva Adviti
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025