Használati útmutató Generac QT10068KNAC
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Generac QT10068KNAC (96 oldal) a generátor kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.0 csillagra
Oldal 1/96
Cover198 Rev. C 07/12 Part No. 0J0216
SECTION PAGE
INTRODUCTION .................................................................... 1-1
SAFETY RULES ....................................................................1-2
IDENTIFICATION RECORD ....................................................2-1
EQUIPMENT DESCRIPTION ..................................................3-1
ENGINE PROTECTIVE DEVICES ............................................4-1
FUEL SYSTEMS ...................................................................5-1
SPECIFICATIONS ..................................................................6-1
GENERAL INFORMATION .....................................................7-1
CONTROL PANEL .................................................................8-1
OPERATION .......................................................................... 9-1
MAINTENANCE ................................................................... 10-1
SERVICE SCHEDULE ..........................................................11-1
TROUBLESHOOTING ..........................................................12-1
EMISSIONS WARRANTY ....................................................13-1
NOTES
EXPLODED VIEWS & PARTS LISTS
WIRING DIAGRAMS & SCHEMATICS
INTRODUCTION
Thank you for purchasing this model of the stationary emergency
generator product line.
Every effort was expended to make sure that the information and
instructions in this manual were both accurate and current at the
time the manual was written. However, the manufacturer reserves
the right to change, alter or otherwise improve this product(s) at
any time without prior notice.
If any portion of this manual is not understood, contact the nearest
Service Dealer for starting, operating and servicing procedures.
Throughout this publication, and on tags and decals affixed to the
generator, DANGER, WARNING, CAUTION and NOTE blocks are
used to alert personnel to special instructions about a particular
service or operation that may be hazardous if performed incor-
rectly or carelessly. Observe them carefully. Their definitions are
as follows:
These safety warnings cannot eliminate the hazards that they
indicate. Common sense and strict compliance with the special
instructions while performing the service are essential to prevent-
ing accidents.
Four commonly used safety symbols accompany the DANGER,
WARNING and CAUTION blocks. The type of information each
indicates is as follows:
n
The operator is responsible for proper and safe use of the equip-
ment. The manufacturer strongly recommends that the operator
read this Owner's Manual and thoroughly understand all instruc-
tions before using this equipment. The manufacturer also strongly
recommends instructing other users to properly start and operate
the unit. This prepares them if they need to operate the equipment
in an emergency.
It is the operator's responsibility to perform all safety checks, to
make sure that all maintenance for safe operation is performed
promptly, and to have the equipment checked periodically by a
Service Dealer. Normal maintenance service and replacement of
parts are the responsibility of the owner/operator and, as such,
are not considered defects in materials or workmanship within the
terms of the warranty. Individual operating habits and usage con-
tribute to the need for maintenance service.
Proper maintenance and care of the generator ensure a minimum
number of problems and keep operating expenses at a minimum.
See a Service Dealer for service aids and accessories.
Operating instructions presented in this manual assume that the
generator electric system has been installed by a Service Dealer or
other competent, qualified contractor. Installation of this equipment
is not a “do-it-yourself” project.
When the generator requires servicing or repairs, simply contact
a Service Dealer for assistance. Service technicians are factory-
trained and are capable of handling all service needs.
When contacting a dealer about parts and service, always supply
the complete Model Number, Serial Number and Type Code (where
applicable) from the DATA LABEL that is affixed to the unit.
1-1
Safety004 Rev. F 05/10
Safety Instructions
n
Termékspecifikációk
| Márka: | Generac |
| Kategória: | generátor |
| Modell: | QT10068KNAC |
Szüksége van segítségre?
Ha segítségre van szüksége Generac QT10068KNAC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók generátor Generac
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
9 Január 2025
4 Szeptember 2024
4 Szeptember 2024
4 Szeptember 2024
4 Szeptember 2024
4 Szeptember 2024
Útmutatók generátor
- generátor Ribimex
- generátor Wood's
- generátor MSW
- generátor ART
- generátor Powerkick
- generátor Westinghouse
- generátor Jackery
- generátor Black & Decker
- generátor Full Boar
- generátor Alpha Tools
- generátor AudioControl
- generátor Briggs & Stratton
- generátor Rigol
- generátor Harvia
- generátor Robin America
Legújabb útmutatók generátor
27 Március 2025
27 Március 2025
27 Március 2025
15 Január 2025
12 Január 2025
11 Január 2025
11 Január 2025
11 Január 2025
11 Január 2025
11 Január 2025