Használati útmutató GFI System Rossie

Olvassa el alább 📖 a magyar nyelvű használati útmutatót GFI System Rossie (11 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/11
User Manual
R O S S I E
FILTER
Table of Contents
1 Knobs and Buttons Page 1
2 Footswitches and LEDs 2
3 Expression Input 3
4 Tap-Tempo Input 3
5 Saving Presets 4
6 Options 4
7 Global Settings 5
8 Algorithms 6-8
9 Expression / Ramping Setup 9
10 Factory Reset 10
U S E R M A N U A L
1
User Manual
Every knob is also a buon. The following operaons can be done on each knob :
TURN PUSH or TAP HOLD TWIST ( hold and turn )
Here’s a summary of what each knob and each switch does, this is just a quick reference, more detailed
explanaon will be given in the next chapter.
Turn - adjust primary parameters.
Push - toggle expression mapping for the parameter.
Hold - enter expression value setup. heel/toe
Twist - Adjust secondary parameter (see table below).
Turn - select modes.
Push - Enter OPTIONS menu.
Hold - enter GLOBALS seng menu.
Twist - Adjust secondary parameter (see table below).
RO S S I E
FILTER
KNOB 1, 2, and 3
KNOB 4
1. Knobs and Buons
Primary Parameters Secondary Parameters
knob 1 knob 2 knob 3 knob 1 knob 2 knob 3
ENVELOPE FILTER Sensivity Range Mix Up/Down Q Filter Type
STEP FILTER Speed Step Edit Mix Step size Range Filter Type
MANUAL FILTER Frequency Range Mix Taper Q Filter Type
Modes
ON/OFF LED PRESET LED
Orange: : Preset A, Green Preset B
2
User Manual
TEMPO LED
Momentary Operaon
< when bypassed > ~ Holding the Engage/Ramp buon down for at least 1/2 sec triggers mo-
mentary operaon, i.e pedal will revert to bypassed state when footswitch is released.
Ramping
< when engaged > ~ Holding the buon for at least 1/2 sec triggers : a ramping operaon
mapped parameters is ramped from its inial value to pre-congured nal value, and stays at
that final value for as long as the footswitch is held down. When switch is released the parame-
ter gradually returns to its inial value.
A/B - TAP switch Priority.
Priority for the A/B-TAP footswitch can be reversed in Global seng (see page 6 for details).
A/B - TAP SWITCH
TAP
-> bypass / engage
HOLD (when bypassed) for > 500 ms
-> engages momentarily
HOLD (when engaged) for > 500 ms
-> start parameter ramping.
TAP
-> change preset (A <-> B)
HOLD for 1 second
-> enter tap-tempo mode: when
tempo LED stops blinking you may tap
in the new tempo*.
* Tap-tempo is applicable only in
Step Filter mode.
ROS S I E
FILTER
ENGAGE / RAMP SWITCH
2. Footswitches and LEDs

Termékspecifikációk

Márka: GFI System
Kategória: nincs kategorizálva
Modell: Rossie

Szüksége van segítségre?

Ha segítségre van szüksége GFI System Rossie, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek