Használati útmutató Gigabyte GA-7VM400M

Gigabyte alaplap GA-7VM400M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gigabyte GA-7VM400M (104 oldal) a alaplap kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/104
When you installing AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X.
Caution: AGP 2X card is not supported by VIA ® KM400. You might
experience system unable to boot up normally. Please insert an AGP
4X/8X(1.5V) card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode
by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-7VM400M (or any AGP 4X/8X only) motherboards might not
function properly, if you install this card without switching the jumper to 4X/
8X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support
2X(3.3V) only. The GA-7VM400M (or any AGP Pro 4X/8X only) motherboards
might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with VIA ® KM400 based
motherboards.
AGP 4X/8X notch

Termékspecifikációk

Márka: Gigabyte
Kategória: alaplap
Modell: GA-7VM400M

Szüksége van segítségre?

Ha segítségre van szüksége Gigabyte GA-7VM400M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek