Használati útmutató Gigabyte GA-7VT600-L

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gigabyte GA-7VT600-L (104 oldal) a alaplap kategóriában. Ezt az útmutatót 21 ember találta hasznosnak.

/ 104 PDF

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP

card is AGP 4X/8X(1.5V).

Caution: AGP 2X(3.3V) card is not supported by VIA® KT600. You

might experience system unable to boot up normally. Please insert

an AGP 4X/8X(1.5V) card

Example 1: Diamond Vipper V770 golden finger is compatible with

2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X

(1.5V) mode by adjusting the jumper. The factory default for this card is

2X(3.3V).

The GA-7VT600(-L) (or any AGP 4X only) motherboards might not

function properly, if you install this card without switching the jumper to

4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by "Power

Color", the graphics card manufacturer & some SiS 305 cards, their

golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but

they support 2X(3.3V) only. The GA-7VT600(-L) (or any AGP 4X only)

motherboards might not function properly, If you install thiscard in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on

ATi Rage 128 Pro chip, the design of AG32S(G) is compliance

with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work

fine with VIA® KT600 based motherboards.

AGP 4X/8X notch

Termékspecifikációk