Használati útmutató Gigabyte GA-8GE800

Gigabyte alaplap GA-8GE800

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gigabyte GA-8GE800 (96 oldal) a alaplap kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/96
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has "AGP
4X notch"(show below), please make sure your AGP card is AGP 4X
(1.5V).
Caution: AGP 2X card is not supported by Intel® 845(GE/PE) /
845(E/G) / 850(E). You might experience system unable to boot up
normally. Please insert an AGP 4X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)mode
by adjusting the jumper. The factory default for this card is 2X(3.3V). The
GA-8GE800 (or any AGP 4X only) motherboards might not function properly,
if you install this card without switching the jumper to 4X(1.5) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X
(3.3V) only. The GA-8GE800 (or any AGP 4X only) motherboards might not
function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel ®
845(GE/PE) /
845(E/G) / 850(E) based motherboards.

Termékspecifikációk

Márka: Gigabyte
Kategória: alaplap
Modell: GA-8GE800

Szüksége van segítségre?

Ha segítségre van szüksége Gigabyte GA-8GE800, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek