Használati útmutató Godex PE200

Godex nyomtató PE200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Godex PE200 (23 oldal) a nyomtató kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.3 csillagra

Letöltés PDF

Oldal 1/23

PE200/PE300 Series

Printing Mechanism

User Manual

Version B :

Issue Date :20 . . 20 07 29

P/N :920-028111- 00

Declaration

As the printer module and PCB control board are shipped without enclosure, it may not comply with

related FCC, EMC and EMI standards.

Safety Instructions

Please follow the instructions carefully:

1. Keep the module away from humidity.

2. Before connecting to power outlet, please check the voltage of the power source is within the

required specifications.

3. Make sure the module is switch off before plug the power source. to

4. To prevent possible transient power damage, it is recommended connecting the module to a

surge protector.

5. Get rid of any liquid on or inside the module to prevent electric shock or short circuit.

6. Unplug the power before any kind of repair or adjustment.

7. Residual heat may accumulate on step motor and print head, please don’t touch them.

8. Print head is ESD sensitive device, please don’t touch it and its peripherals with bare hand.

9. For safety and warranty reasons, ONLY qualified personnel are allowed to maintain the module.

Caution:

Replace parts only with the equivalent type recommended by the manufacturer.

Only use with power supply adapter model:

Changes or modifications, if not expressly approved by the party responsible for compliance, could

void the user’s authority to operate the equipment.

Specifications are subjected to change without notice.

Table of Contents

1. Introduction .................................................................................................................................................................... 4

2. Technical Data .............................................................................................................................................................. 4

2.1 Specifications .................................................................................................................................................... 4

2.2 General Description ........................................................................................................................................ 5

3. Installation ....................................................................................................................................................................... 6

3.1 Site Location ...................................................................................................................................................... 6

3.2 Installation Requirements ............................................................................................................................... 7

3.3 Media Loading ................................................................................................................................................. 8

4. Accessories(dimension) 9..............................................................................................................................................

4.1 PCBA .................................................................................................................................................................... 9

4.2 Linerless Cutter Module(PE200) .................................................................................................................. 10

4.3 Rewinder Module(PE200) ............................................................................................................................. 11

4.4 Label Taken Sensor and Rewinder(PE200) .............................................................................................. 12

4.5 Standard Cutter Module(PE200) ............................................................................................................... 13

4.6 Linerless Cutter Module(PE300) .................................................................................................................. 14

4.7 Rewinder Module(PE300) ............................................................................................................................. 15

4.8 Label Taken Sensor and Rewinder(PE300) .............................................................................................. 16

4.9 Standard Cutter Module(PE300) ............................................................................................................... 17

5. Regular Maintenance ...............................................................................................................................................18

5.1 Printer Head and platen Cleaning ........................................................................................................... 18

5.2 Cutter Cleaning .............................................................................................................................................. 19

6. Operator Panel ............................................................................................................................................................ 20

6.1 Feed Button ..................................................................................................................................................... 20

6.2 LED Status ......................................................................................................................................................... 20

6.3 Label Size Calibration ................................................................................................................................... 20

6.4 Label Size Calibration Printout .................................................................................................................... 21

7. Troubleshooting ........................................................................................................................................................... 22

Appendix ............................................................................................................................................................................... 23