Használati útmutató Gossen Metrawatt SMARTCONTROL
Gossen Metrawatt
okos otthon
SMARTCONTROL
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gossen Metrawatt SMARTCONTROL (24 oldal) a okos otthon kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/24
Operating Instructions
SMART CONTROL | ECS 3-349-423-03
Energy Management-System 4/5 9.1
2013
Please note: This software is protected by German copyright and international treaties.
Unauthorized copying or distribution of this software, either in part or in its entirely, is subject
to prosecution by law.
2 -I Messtechnik GmbH GMC
1 Range of Applications
Diverse Data Collector and Data Messenger
The SMARTCONTROL renders energy consumption measurable without delay in a detailed
fashion, and thus controllable. This, in turn, is the basic prerequisite for a great variety of
measures for the reduction of energy consumption and costs, for example with regard
to:
- Optimized utilization
- Contracting
- Component modernization
- Conversion
The SMARTCONTROL is an inexpensive, user-friendly, easy to integrate data logging
system. This is the prerequisite for quickly establishing efficient, sustainable, widespread
energy management for buildings and properties.
Amongst other data, the SMARTCONTROL is capable of recording the following:
- Meter readings (electrical power, heat, water, gas etc.)
- Temperatures (inside, outside, inlet, return etc.)
- Statuses (burner and pump on-times etc.)
- Analog signals from external signal converters and measuring transducers (pressure,
humidity etc.)
- M-Bus protocol (up to 450 meters), ModBus, SBus, CLBus, LON
One of the system’s important advantages is its ability to access all relevant data at any
t quickly and conveniently. ime –
We are at your disposal and can provide you with solutions if you want to make actual
energy consumption more transparent in the future, and optimize it as well.
Information regarding all facets of GMC-I Messtechnik GmbH, as well as other industry
information, can be accessed at:
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg, Germany
Phone: +49 (0) 911 8602-111
Fax: +49 (0) 911 8602-777
e-mail: info@gossenmetrawatt.com
Internet: www.gossenmetrawatt.com
Operating Instructions
3 -I Messtechnik GmbH GMC
Table of Contents
1 SMARTCONTROL Manager Software .............................................................. 5
1.1 Installation .................................................................................................... 5
1.2 Overview ....................................................................................................... 6
1.3 User Interface ............................................................................................... 6
Menu Bar ............................................................................................................. 6
Toolbar(s) ............................................................................................................ 7
Status Line 8..........................................................................................................
Scenario Browser .................................................................................................. 9
Network Toolbar ................................................................................................... 9
Data Toolbar ...................................................................................................... 10
OPC Server Toolbar ............................................................................................. 10
Toggle Tab Bars .................................................................................................. 10
Message Window ................................................................................................ 10
Numeric Format for Entering Values ....................................................................... 11
1.4 Entering Projects, Buildings and Devices With the Application Assistant .... 11
1.5 Entering Projects, Buildings and Devices Without the Application Assistant 12
1.6 The “Configuration” Tab .............................................................................. 16
TCP/IP ............................................................................................................... 16
Router ............................................................................................................... 16
e-mail Recipients ................................................................................................ 17
TCP/IP Recipients ................................................................................................ 17
Phone Recipients ................................................................................................. 18
Configuring Error Indication Tip: Refer to the online help as well! .............................. 19
Time ................................................................................................................. 21
Modem .............................................................................................................. 23
Information ........................................................................................................ 23
1.7 The “Calibration” Tab .................................................................................. 24
Temperature Sensor ............................................................................................ 24
A-D Converter .................................................................................................... 25
Meter (digital inputs) ........................................................................................... 26
Status (digital inputs) .......................................................................................... 28
Relay Start Status ............................................................................................... 28
Access Rights ..................................................................................................... 29
1.8 The “Programming” Tab, Commands ........................................................... 30
Program Priorities ............................................................................................... 33
Program Command Attributes in Tabular View ......................................................... 34
Finding Program Commands ................................................................................. 35
Transmitting Programs to the SMARTCONTROL and Starting Them ............................. 35
Restarting the SMARTCONTROL ............................................................................36
M-Bus Command Type ......................................................................................... 37
M-Bus Application Command Type ......................................................................... 39
Calculator Command Type .................................................................................... 41
Formula Calculator Command Type ........................................................................ 43
Timer Program Command Type ............................................................................. 46
Multifunctional Timer Command Type Tip: Refer to the online help as well! ................. 48
Power Calculator Command Type Tip: Refer to the online help as well! ..................... 50
Termékspecifikációk
| Márka: | Gossen Metrawatt |
| Kategória: | okos otthon |
| Modell: | SMARTCONTROL |
Szüksége van segítségre?
Ha segítségre van szüksége Gossen Metrawatt SMARTCONTROL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók okos otthon Gossen Metrawatt
29 Augusztus 2024
Útmutatók okos otthon
- okos otthon Vimar
- okos otthon WiZ
- okos otthon Speed-Link
- okos otthon Intertechno
- okos otthon Sommer
- okos otthon Busch-Jaeger
- okos otthon Linksys
- okos otthon Airlive
- okos otthon Chuango
- okos otthon Livoo
- okos otthon Paulmann
- okos otthon Logicom
- okos otthon Silvergear
- okos otthon EQ-3
- okos otthon EZVIZ
Legújabb útmutatók okos otthon
29 Március 2025
29 Március 2025
29 Március 2025
27 Március 2025
19 Március 2025
18 Március 2025
15 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025