Használati útmutató Gravity LTS T01
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gravity LTS T01 (2 oldal) a DJ Gear kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/2
Gravity® is a registered brand of the Adam Hall Group Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Phone: +49 60 81 · 94 19-0
adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
LTST 01
LAPTOP STAND WITH ADJUSTABLE HOLDING PINS
FEATURES
• Compact and lightweight laptop stand
• Tray with adjustable holding pins
• Suitable for laptops, tablets, smaller mixers and effects
• Tray can be tilted by 180 degrees
DESCRIPTION
No mat ter if you’re working on stage, at home, in the studio or on location at
a photo shoot, now your laptop can stay firmly fixed in place and stable at
all times in your mobile performance rigs –positioned just the way you want
– all thanks to the Gravity® LTST 01 laptop stand.
The large mounting plate can accommodate all standard laptop sizes ranging
from 12” to 17”. Your laptop is carefully and securely attached to the stand
thanks to 14 slots in the top section, 2 slots in the bottom section, and the
freely adjustable holding pins and clamps that come supplied with the
product. The holding pins are pressed onto the laptop and then locked into
place from below using the set screws.
You can also use the stand for your DJ controller, mixer or other pieces of
equipment that you always need within arm’s reach. The mounting plate
can be tilted continuously by 180°, meaning it can be used both in vertical
and horizontal applications. It can also be easily twisted off for use in the
field.
Its solid aluminium tripod with a 35 mm socket has been designed for maximum
mobilit y because it weighs only 1.94 kilograms. The stand’s height can be
gradually adjusted from 750 mm to 1.320 mm, allowing you to adjust it
perfectly to your needs – whether you’re standing or sitting.
With the LTST 01 laptop stand, Gravity® offers you a flexible companion for
your mobile performance rigs.
Product type GLTST01
Product type Stands and Tripods Multimedia Equipment
Type Laptop Stand
Steel Steel
Tubing material Aluminum
Tubing surface Powder coated
Color Black
Width adjusting jaws 40 mm
Width spacing between adjusting pins
min.
120 mm
Width spacing between adjusting pins
max.
425 mm
Height spacing between adjusting pins to
adjusting jaws min.
117 mm
Height spacing between adjusting pins to
adjusting jaws max.
250 mm
Width spacing between adjusting jaws
min.
130 mm
Width spacing between adjusting jaws
max.
360 mm
Tray width 480 mm
Tray height 330 mm
Min height 750 mm
Max height 1320 mm
Transport length 665 mm
Height adjustment Adjusting screw with safety pin
Base type Leg joint
Base material Die-cast aluminum
Tubing diameter 35 mm
Max. load 35 kg
Interchangeable rings 2x 30 mm
Black ring pack included Yes
Weight 4.02 kg
SPECIFICATIONS
Termékspecifikációk
| Márka: | Gravity |
| Kategória: | DJ Gear |
| Modell: | LTS T01 |
Szüksége van segítségre?
Ha segítségre van szüksége Gravity LTS T01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók DJ Gear Gravity
13 Augusztus 2024
13 Augusztus 2024
13 Augusztus 2024
12 Augusztus 2024
10 Augusztus 2024
10 Augusztus 2024
9 Augusztus 2024
Útmutatók DJ Gear
- DJ Gear Monkey Banana
- DJ Gear SPL
- DJ Gear TC Helicon
- DJ Gear Trevi
- DJ Gear Skytec
- DJ Gear ION
- DJ Gear Monacor
- DJ Gear Fenton
- DJ Gear Apart
- DJ Gear Formula Sound
- DJ Gear Behringer
- DJ Gear AVerMedia
- DJ Gear Stanton
- DJ Gear Alesis
- DJ Gear Numark
Legújabb útmutatók DJ Gear
15 Március 2025
12 Január 2025
12 Január 2025
8 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025
6 Január 2025