Használati útmutató Gre CIKPCO41

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gre CIKPCO41 (11 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 3.6 csillagra

Oldal 1/11
EN
ASSEMBLY SUGGESTIONS: WINTER COVERS
wooden pool container/composite pool container
Image of hooks
on the surface
Contents of the package: Canvas, Fixings, Perimeter fastening cable
Installation advice:
1- Place the cover on the pool:
- Unroll the cover along the pool container and centre it.
- Extend the cover over the pool container, holding it in the corners.
2- Pass the fastening cable through the eyelets.
3- Screw the hooks at a distance of about 30 cm below the edge and between the eyelets on the
cover.
Pass the cable through the hooks and adjust the tension by balancing the tensile forces of the
fixing panels.
Do not stretch the cable too much, leave it loose.
* If the cover is rectangular, fix the corners first; if it is not, start on a cut panel.
Installation advice:
1- Place the cover on the pool:
- Unroll the cover along the pool container and centre it.
- Extend the cover over the pool container, holding it in the corners.
2- Pass the fastening cable through the eyelets.
3- Stretch the cable so that it passes under the edge that surrounds the pool.
Remove the excess cable by sliding it through the hook (see image).
Stretch the cable and leave some slack.
* If the cover is rectangular, fix the corners first; if it is not, start on a cut panel.
Accessories for
wooden pool
Accessories for
composite pool
Eyelet
~ 80 cm
Rainwater
drainage
holes

Termékspecifikációk

Márka: Gre
Kategória: nincs kategorizálva
Modell: CIKPCO41

Szüksége van segítségre?

Ha segítségre van szüksége Gre CIKPCO41, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek