Használati útmutató Gre CIKPCOR60

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gre CIKPCOR60 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.2 csillagra

EN

ASSEMBLY SUGGESTIONS: WINTER COVERS

wooden pool container/composite pool container

Image of hooks

on the surface

Contents of the package: Canvas, Fixings, Perimeter fastening cable

Installation advice:

1- Place the cover on the pool:

- Unroll the cover along the pool container and centre it.

- Extend the cover over the pool container, holding it in the corners.

2- Pass the fastening cable through the eyelets.

3- Screw the hooks at a distance of about 30 cm below the edge and between the eyelets on the

cover.

Pass the cable through the hooks and adjust the tension by balancing the tensile forces of the

fixing panels.

Do not stretch the cable too much, leave it loose.

* If the cover is rectangular, fix the corners first; if it is not, start on a cut panel.

Installation advice:

1- Place the cover on the pool:

- Unroll the cover along the pool container and centre it.

- Extend the cover over the pool container, holding it in the corners.

2- Pass the fastening cable through the eyelets.

3- Stretch the cable so that it passes under the edge that surrounds the pool.

Remove the excess cable by sliding it through the hook (see image).

Stretch the cable and leave some slack.

* If the cover is rectangular, fix the corners first; if it is not, start on a cut panel.

Accessories for

wooden pool

Accessories for

composite pool

Eyelet

~ 80 cm

Rainwater

drainage

holes

Termékspecifikációk