Használati útmutató Hager HIB440M

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hager HIB440M (3 oldal) a Áramköri megszakító kategóriában. Ezt az útmutatót 15 ember találta hasznosnak.

6LE007719Aa

HIB4xxM

z

Motorised changeover switch

125A to 630A

Installation and commissioning

Cabinet /

Back Plate

Installation

Step 1

Connecting the

power section

Step 2

COMMAND /

CONTROL terminal

connections

Step 3

Power SUPPLY

terminal

connections

Step 4

Check

Step 5

Emergency

Manual

Operation

Step 6B

Control by

an external

order (AUTO)

Step 6A

Padlocking

Step 6C

Clip for

storage

of the

emergency

handle

6LE007719Aa1

Preliminary operations

Check the following upon delivery and after removal of

the packaging:

• Packaging and contents are in good condition.

• The product reference corresponds to the order.

• Contents should include:

- 1 x motorised changeover switch

- 1 x emergency handle and xing clip

- 1 x quick start instruction sheet

Accessories

• Bridging bars and connection kits

• Terminal shrouds

• Terminal shield

This quick start is intended for personnel trained in the

installation and commissioning of this product. For further

details refer to the product instruction manual available

on the hager website.

• This product must always be installed and

commissioned by qualied and approved personnel.

• Maintenance and servicing operations should be

performed by trained and authorised personnel.

• Do not handle any control or power cables connected

to the product when voltage may be, or may become

present on the product, directly through the mains or

indirectly through external circuits.

• Always use an appropriate voltage detection device to

conrm the absence of voltage.

• Ensure that no metal objects are allowed to fall in the

cabinet (risk of electrical arcing).

Risk of electrocution, burns or injury to

persons and / or damage to equipment.

Risk of damaging the device: In case the

product is dropped or damaged in any way

it is recommended to replace the complete

product.

• For 125 - 160A (Uimp = 8 kV). Terminations must

respect a minimum of 8 mm clearance from live parts

to parts intended to be earthed and between poles.

• For 200 - 630A (Uimp = 12 kV). Terminations must

respect a minimum of 14 mm clearance from live parts

to parts intended to be earthed and between poles.

Failure to observe good enginering practises as well as

to follow these safety instructions may expose the user

and others to serious injury or death.

Termékspecifikációk